[Asterisk-Users] Panasonic PBX -to- Sirrix BRI: Numbers gettingechoed/duplicated

[David Wilson]

Hi Peter,

Thanks for your reply.

Would "srx show ccmsgs 1" help ?


Regards
David Wilson
_______________________________
D c D a t a
Tel +27 33 342 7003
Fax +27 33 345 4155
Cell +27 82 4147413
http://www.dcdata.co.za
support at dcdata.co.za
Powered by Linux, driven by passion !
_______________________________

"Computers are not intelligent. They only think they are."

----- Original Message ----- 
From: "Peter Svensson" <psvasterisk at psv.nu>
To: "David Wilson" <dave at dcdata.co.za>
Cc: "Asterisk Users Mailing List - Non-Commercial Discussion" 
<asterisk-users at lists.digium.com>; <psvasterisk at psv.nu>
Sent: Thursday, July 14, 2005 10:04 PM
Subject: Re: [Asterisk-Users] Panasonic PBX -to- Sirrix BRI: Numbers 
gettingechoed/duplicated


> On Thu, 14 Jul 2005, David Wilson wrote:
>
>> Yes, as far as I know ? In that context I have the following:
>> [pabx2ip]
>> exten => s,1,Answer
>> exten => s,2,Wait(1)
>> exten => s,3,ResponseTimeout(3)
>> exten => s,4,Background,enter-ext-of-person
>> exten => _X.,1,Dial,IAX2/pmb/${EXTEN}
>> exten => t,1,Hangup
>> exten => i,1,Goto(s,1)
>>
>> Should be OK ?
>
> Yes, it should be ok. At this point Asterisk should have sent an Answer
> message to the pbx and it should have stopped sending digit indications
> in the control channel.
>
> I am not familiar with the Sirrix cards. Can you get the equivalent of a
> Zaptel "pri intense debug" for the data from that card?
>
> Peter
>
>