[Asterisk-Users] NO calling tone

[Eric Wieling aka ManxPower]

Make sure you have /etc/asterisk/indications.conf  If that fixes it, 
let me know.

Michiel van Baak wrote:
> On 14:12, Thu 14 Jul 05, Bill Wong wrote:
> 
>>Thank you Michiel.
>>I tried to remove m and use r , but still not working, after I change r 
>>to R , it is working. Anybody know why?
>>
> 
> 
> This is in the 'show application dial'
> 
> 'r' -- indicate ringing to the calling party, pass no audio until answered.
> 'R' -- indicate ringing to the calling party 	when the called party indicates
> 	ringing, pass no audio until answered.
> 
> strange the r is not working.
> R will not generate ringing sound, it will simply pass the
> ringing sound the other end provides.
> 
> 
>>
>>Michiel van Baak wrote:
>>
>>
>>>On 11:12, Wed 13 Jul 05, Bill Wong wrote:
>>>
>>>
>>>
>>>>Can you show me the example, i am newbie.NOt sure whether the code i 
>>>>modified is correct or not..
>>>>
>>>>my code as below..
>>>>
>>>>exten => 671042,1,Dial(${PHONES1},20,Ttmr)
>>>>
>>>>  
>>>>
>>>
>>>loose the m.
>>>m = provide music while ringing
>>>r = provide ring sound while ringing.
>>>Using both is conflicting and will result in silence while
>>>ringing.



-- 
Always do right. This will gratify some people and astonish the rest.
Mark Twain