[Asterisk-Users] VM Outcall: Rube Goldberg Edition
Kevin
Asterisk at gtcus.com
Wed Jul 13 17:10:36 MST 2005
Is the pager filed in the vm config still for the outcall destination or
where do you specify the number to call for the outcall?
-----Original Message-----
From: Eric Wieling aka ManxPower [mailto:eric at fnords.org]
Sent: Sunday, July 10, 2005 5:11 PM
To: Kevin; asterisk-users at lists.digium.com
Subject: [Asterisk-Users] VM Outcall: Rube Goldberg Edition
Resent to the list since I didn't think you would mind.
Kevin wrote:
> Eric,
>
> I have been using your vm outcall script for some time and it has
worked
> well. Thanks for your efforts.
>
> I am trying to re-install and I can't seem to get a call file
generated.
> I have set up postfix and in the log it appears that it pipes the
> message to the vmoutcall script. But that's as far as I get.
>
> I was hopeful that you could offer a suggestion on how to debug the
> activity of the script so I can try to figure out why it isn't
working.
I don't provide support for any of the sample scripts, etc that I write.
The original VM Outcall was very primitive. Now that Asterisk has the
externnotify= option I have a much better, but still pretty primitive,
script.
In /etc/voicemail.conf, in [general] put:
========================================================================
===
externnotify=/usr/local/bin/vm-notify.pl
========================================================================
===
Here is the vm-notify.pl script:
========================================================================
===
#!/usr/bin/perl -w
use Fcntl;
use Fcntl ":flock";
$dial_context="local-access";
($vm_box, $vm_context) = $ARGV[1] =~/(.*)\@(.*)/;
$current_vm_context = "";
if(!sysopen($vm_conf_file_handle, "/etc/asterisk/voicemail.conf",
O_RDONLY))
{
printf("Cannot open /etc/asterisk/voicemail.conf!\n");
exit(1);
}
while($vm_conf_line = <$vm_conf_file_handle>) {
chomp($vm_conf_line);
if((substr($vm_conf_line,0,1) eq ";") || (length($vm_conf_line) ==
0)) {
next;
}
($tmp_vm_context) = $vm_conf_line =~ /\[(.*)\]/;
if(defined($tmp_vm_context)) {
if($current_vm_context ne "") {
exit(0);
}
if($tmp_vm_context eq $vm_context) {
$current_vm_context = $vm_context;
next;
}
} else {
if($current_vm_context eq $vm_context) {
($tmp_vm_box) = $vm_conf_line =~ /(\d+)/;
if($tmp_vm_box eq $vm_box) {
($dial_dest) = $vm_conf_line =~ /.*notify=(\d+)/;
if(!defined($dial_dest)) {
exit(0);
}
close($vm_conf_file_handle);
# If there's already a .call file for this mailbox then don't
do anything.
# If there isn't already a .call file then create it.
#$call_file_name = "/tmp/" . $vm_box . ".call";
$call_file_name = "/var/spool/asterisk/outgoing/" . $vm_box .
".call";
if(!sysopen($call_file_handle, "$call_file_name",
O_WRONLY|O_CREAT|O_EXCL)) {
exit(0);
}
flock($call_file_handle, LOCK_EX);
# Set the access and modification times to be 10 years in the
future so
# Asterisk will ignore this file while we are doing stuff with
it.
$long_time = time() + (10 * 365 * 24 * 60 * 60);
utime($long_time, $long_time, "$call_file_name");
srand;
$call_delay=300 + rand(120);
# Build our .call file.
printf($call_file_handle "Channel:
Local/^%s^%s^%s^%s\@vm-notify\n", $vm_box, $vm_context, $dial_dest,
$dial_context);
printf($call_file_handle "WaitTime: 30\n");
printf($call_file_handle "RetryTime: %i\n", 60 + rand(5));
printf($call_file_handle "MaxRetries: 12\n");
printf($call_file_handle "Context: vm-notify\n");
printf($call_file_handle "Extension: s\n");
printf($call_file_handle "Priority: 1\n");
printf($call_file_handle "Callerid: Voicemail Notify
\<9852463509\>\n");
printf($call_file_handle "SetVar: VM_BOX=%s\n", $vm_box);
printf($call_file_handle "SetVar: VM_CONTEXT=%s\n",
$vm_context);
# Unlock and close the file.
flock($call_file_handle, LOCK_UN);
close($call_file_handle);
# Set the access and modification times to be 10 mins in the
future so
#Asterisk will delay for 10 mins before processing this .call
file
$short_time = time() + $call_delay;
utime($short_time, $short_time, "$call_file_name");
exit(0);
}
} else {
next;
}
}
}
========================================================================
===
In /etc/asterisk/extensions.conf you need to put this:
========================================================================
===
[vm-notify]
exten => _^X.,1,Cut(VM_BOX=EXTEN,^,2)
exten => _^X.,2,Cut(VM_CONTEXT=EXTEN,^,3)
exten => _^X.,3,Cut(DIAL_DEST=EXTEN,^,4)
exten => _^X.,4,Cut(DIAL_CONTEXT=EXTEN,^,5)
exten => _^X.,5,HasNewVoiceMail(${VM_BOX}@${VM_CONTEXT})
exten => _^X.,6,Answer
exten => _^X.,7,Hangup
exten => _^X.,106,Dial(Zap/g2/${DIAL_DEST},20)
exten => _^X.,107,Noop(DIALSTATUS=${DIALSTATUS})
exten => _^X.,108,GotoIf($[${DIALSTATUS} = CHANUNAVAIL]?111)
exten => _^X.,109,GotoIf($[${DIALSTATUS} = CONGESTION]?111)
exten => _^X.,110,Answer
exten => _^X.,111,Hangup
exten => s,1,Wait(1)
exten => s,2,HasNewVoiceMail(${VM_BOX}@${VM_CONTEXT},VM_NUMBER)
exten => s,3,Hangup
exten => s,103,SetVar(LOOP=1)
exten => s,104,ResponseTimeout(1)
exten => s,105,Background(vm-youhave)
exten => s,106,SayNumber(${VM_NUMBER})
exten => s,107,Background(vm-INBOX)
exten => s,108,Background(vm-messages)
exten => s,109,Background(vm-for)
exten => s,110,Background(extension)
exten => s,111,SayDigits(${VM_BOX})
exten => s,112,Background(vm-instructions)
exten => 1,1,ResponseTimeout(0)
exten => 1,2,VoicemailMain(${VM_BOX}@${VM_CONTEXT})
exten => #,1,Playback(goodbye)
exten => #,2,Hangup
exten => t,1,GotoIf($[${LOOP} > 3]?#,1)
exten => t,2,SetVar(LOOP=$[${LOOP} + 1])
exten => t,3,Goto(s,104)
========================================================================
===
Why all the crap with CUT and ^ asd that weird pattern match? Well, as
far as I can tell when, in a .call file, you use SetVar, it does NOT set
those variables for "Channel: Local/" leg of the call, only the
"Context: Extension: Priority:" part of the call.
This script, run by externnotify, creates a .call file that "calls" a
Local/ channel. That channel runs an extension that checks to see if
the user has new voicemail. Maybe they checked their voicemail between
the time the .call file was created (when the message was left) and the
time the .call file actually runs. The script makes sure the .call file
will run about 10 mins in the future.
If the user has no new voicemail, the extension answers and then hangs
up the call. This makes sure the .call system knows that the call was
"answered".
If there is still new voicemail, then the call happens, and the person
is told how many messages they have, and have a chance to log into
voicemail. I would like to be able to detect voicemail answering and
not start playing prompts unless a human answers.
--Eric
--
Eric Wieling * BTEL Consulting * 504-210-3699 x2120
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list