[Asterisk-Users] Cisco 79XX Jitter Stats Question

[info at beprojects.com]

It depends on whether you have re-invite enabled.  It is measuring the 
jitter of the rtp stream, so if re-invite is on, then it is measuring to 
the far end.  If re-invite is off, then it is measuring to *.

Matthew Boehm wrote:
> When on a call, you can press the middle round button and bring up some 
> RTP statistics.
> 
> Can anyone confirm my theory that the AvgJtr and MaxJtr are between this 
> phone and the far end?
> 
> Or is this jitter reading only between this phone and asterisk?
> 
> I'm guessing its the foremost, because when I make a local call to PRI, 
> the jitter is low/0 since the call would terminate at asterisk.
> 
> But when on LD call, which goes to carrier via sip, the jitter on the 
> phone bounces around.
> 
> Thanks,
> Matthew
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> .
>