[Asterisk-Users] Help Configuring TDM04B

[jraborg at perunet.net]

I ha the same problem, could be irq issue if you have zaptel.conf and
zapata.conf configured properly.
modprobe ??? had been loaded?
check dmesg
check irq's
cat /proc/interrupts
lspci -vv
look for the card information

JR
> Hi:
>
> I had an fxo card from Digitnetworks and it was
> working fine on my Asterisk box. I then replaced it
> with TDM04B. I changed the zaptel and zapata to
> include the four channels. When I run ztcfg, I get
> configuration errors:
>
>
> Channel map:
>
> Channel 01: FXS Kewlstart (Default) (Slaves: 01)
> Channel 02: FXS Kewlstart (Default) (Slaves: 02)
> Channel 03: FXS Kewlstart (Default) (Slaves: 03)
> Channel 04: FXS Kewlstart (Default) (Slaves: 04)
>
> 4 channels configured.
>
> ZT_CHANCONFIG failed on channel 1: No such device or
> address (6)
>
> Any suggestions beside the power plug I should try?
>
> Thanks
>
>
>
>
>
> ____________________________________________________
> Sell on Yahoo! Auctions – no fees. Bid on great items.
> http://auctions.yahoo.com/
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>