[Asterisk-Users] IAXphone -> ip address -> extension number.

[Zoltan Szecsei]

Yeee-haaaa!

doesn't this look pretty?

*******************************************
Asterisk Ready.
*CLI>     -- Accepting AUTHENTICATED call from 192.168.0.201, requested 
format = 4, actual format = 4
    -- Executing Dial("IAX2/z1 at z1/1", "IAX2/z2|20|tr") in new stack
    -- Called z2
    -- Call accepted by 192.168.0.202 (format ulaw)
    -- Format for call is ulaw
    -- IAX2/z2/2 is ringing
    -- IAX2/z2/2 answered IAX2/z1 at z1/1
    -- Attempting native bridge of IAX2/z1 at z1/1 and IAX2/z2/2
    -- Channel 'IAX2/z1 at z1/1' ready to transfer
    -- Channel 'IAX2/z2/2' ready to transfer
    -- Releasing IAX2/z2/2 and IAX2/z1 at z1/1
    -- Hungup 'IAX2/z2/2'
  == Spawn extension (geograph, 202, 1) exited non-zero on 'IAX2/z1 at z1/1'
    -- Hungup 'IAX2/z1 at z1/1'
    -- Registered 'z1' (AUTHENTICATED) at 192.168.0.201:4569
    -- Registered 'z2' (AUTHENTICATED) at 192.168.0.202:4569

*CLI>
*******************************************

Rich! Carlos! - Pizzas on me when you come to Cape Town. (or I get to 
where you are - where's that?)

What a learning curve - big thanks and let me give you a suggestion: 
Take leave the week after next - I'm going to be plugging in 2 internal 
ISDN BRI cards ;-)
(next week will be to sort out the choppy sound & to move from my SuSE 
9.3 toy box to the production FC3 (dare I try FC4) box - so maybe take 
next week off as well :-)

(Carlos - I'll respond to your zaprtc query later today)

Cheers & thanks - sincerely hope to be able to return the effort one day.
regards to all,
Zoltan


Rich Adamson wrote:

>>all0w=ulaw
>>all0w=alaw
>>all0w=gsm
>>    
>>
>
>Look closely at the above four lines. In the "allow" statement, that
>appears to be a zero. Change that to "allow". Also, I don't know 
>which codecs the phone supports, but you might start playing with
> disallow=all
> allow=ulaw
>and go from there.
>  
>
you're 100% right - I saw the typo when the lines were commented out and 
the codecs were in the [z1] section. I then changed back in order to 
shorten the iax.conf file but forgot about the typos. Thanks - it 
could've taken many more hours for me to notice them again :-)

>  
>
>>[z1]
>>type=friend
>>user=z1
>>secret=z1
>>context=geograph
>>host=dynamic
>>dtmfmode=rfx2833
>>    
>>
>
>If you look at /usr/src/asterisk/configs/iax.conf.sample, you'll 
>find that dtmfmode=rfx2833 is not a valid iax statement. Plus its
>spelled wrong (its rfc2833). Remove it, but add it into your sip.conf
>if you're going to play with sip.
>  
>

jeeze - dislexia rulz (never change a config file when in a hurry to do 
something else)

> 
>  
>
>>*************** asterisks response as I dial ************
>>Asterisk Ready.
>>*CLI> iax2 show p
>>peers         provisioning
>>*CLI> iax2 show peers
>>Name/Username    Host                 Mask             Port      Status
>>z2               192.168.0.202   (D)  255.255.255.255  4569      Unmonitored
>>z1               192.168.0.201   (D)  255.255.255.255  4569      Unmonitored
>>*CLI> iax2 show users
>>Username         Secret                Authen           Def.Context
>>A/C
>>z2               z2                    000000000000003  geograph
>>No
>>z1               z1                    000000000000003  geograph
>>No
>>*CLI>     -- Accepting AUTHENTICATED call from 192.168.0.201, requested
>>format = 4, actual format = 256
>>    
>>
>
>Here is the key:     ^^^^^^^^^^^^
>That is telling you it can't find a compatible codec to allow the
>call to complete. That's the basis for the comments above about the
>allow=ulaw.
>
>  
>
>>     *-- Executing Dial("IAX2/z1 at z1/3", "IAX/z2|20|tr") in new stack*
>>    
>>
>
>Note the above "IAX". I think that should be IAX2, so look in your
>extensions.conf for a dial statement that looks like "Dial(IAX/"
>and change it to "Dial(IAX2/".
>
>  
>
Yep - this too would have taken me a while to notice.