[Asterisk-Users] IAXphone -> ip address -> extension number.

[Rich Adamson]

No one is going to hang you, Carlos. Trying sip probably isn't a bad
idea at all, but that effort still wouldn't resolve the iax issue. ;)

------------------------

> If I write try with sip,  everybody will try to hang me in the highest tree.
> 
> So, If was on your position, I'll try SIP. 
> 
> I'm trying to help, no to argue with anyone, and of course not to dissinform
> or missinterpretate anything. Just help.
> 
> Regards,
> 
> Carlos
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zoltan Szecsei
> Sent: Friday, July 08, 2005 12:54 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] IAXphone -> ip address -> extension number.
> 
> Rich Adamson wrote:
> 
> > The iax2 show peers is indicating the phone is not registering
> >properly. (If the phone "never" changes IP addresses ever, then he
> >"could" put a host= statement in the iax.conf, but that is very
> >non-standard and will only serve to confuse people.)
> >  
> >
> In my reply to "time bandits" suggestion, that is exactly what I did and 
> "iax2 show peers" now shows the IP address.
> 
> *but* I still cannot dial anywhere.
> 
> What you have insinuated in your comment is that Asterisk and the phone 
> should have automatically sorted themselves out and because this is not 
> happening, my problem is elsewhere - proven by the fact that I have 
> hardcoded host=192.168.0.201 in the iax.conf file (whereas before I used 
> to have host=dynamic) and it still does not work.
> 
> Possibilities:
> 1) The iax timing error when I load asterisk (see reply to time bandit)
> 
> 2) The phone itself. They are 2 new Advantage Century Telecomms Corp 
> AC-104ALDU units which I bought because they were both SIP and IAX 
> compatible. No documentation came with them and on the web page I could 
> only find SLD specs, not model ALDU specs. Hmmmmm - I wonder how good 
> that IAX claim is.....
> 
> http://www.act-tel.com.tw/_UpLoad/Pic/P104S-Spec.pdf
> 
> 
> Any suggestions how I should proceed?
> 
> TIA,
> Zoltan