[Asterisk-Users] IAXphone -> ip address -> extension number.

[Carlos Alperin]

This is simple. You didn't define on the IAX.conf where to find the phones.

You need to tell the system which IP has each phone.

That was what I thought this morning when you send me the files.

Carlos

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Time Bandit
Sent: Friday, July 08, 2005 10:53 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] IAXphone -> ip address -> extension number.

> *CLI> iax2 show peers
> Name/Username    Host                 Mask             Port      Status
> z2               (Unspecified)   (D)  255.255.255.255  0
Unmonitored
> z1               (Unspecified)   (D)  255.255.255.255  0
Unmonitored

>From this, you can see that none of the IAX phones are registered.

Under Host, the IP of the phone should be shown, instead of Unspecified

check the config of the phones, they are not registering with Asterisk

hth
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users