[Asterisk-Users] IAXphone -> ip address -> extension number.

[Carlos Alperin]

What about define those phones on the SIP.conf and use sip, instead of IAX.
That protocol use be more used to communicate Asterisk servers more than
phones.

Regards,

Carlos Alperin

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zoltan Szecsei
Sent: Thursday, July 07, 2005 12:09 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] IAXphone -> ip address -> extension number.

Hi,

I'm trying to set up two ACT SIP/IAX capable phones to communicate with 
each other on the same internal network, using asterisk 1.0.9 on SuSE 
9.3 (because I intend to grow the situation after this basic setup is 
functioning)

The phone IPs are set to 192.168.0.201 and 202 respectively.

I've had a look at iax.conf and extensions.conf but cannot see how to 
tie these IPs to an extension number, let alone how to dial that extension.

The "Getting Started with Asterisk" and the "Asterisk Doc Proj - Vol 1" 
that I have been using just have far too much info to work out what can 
be ignored in order to get such a simple setup working.

I'd be happy for any help or pointers to steps that I should have followed.

TIA,
Zoltan

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users