[Asterisk-Users] Help with Cisco 7905G corrupted image!!
Andres Maduro
andres at iconos.com.ve
Tue Jul 5 21:00:30 MST 2005
Hi,
I recently purchased from a friend 2 Cisco 7905G for testing them with
Asterisk.
I was able to upgrade one of them with the SIP image, the other hang up
during the upgrade process and now it won't boot again.
When powered up, the red and green lights keep on and the screen is blank.
Does any one know a procedure to fix this ? I do not have a contract with
Cisco, I have even call a friend in Cisco which said that I must purchase a
contract to be able to open a TAC ticket.
Any help is greatly appreciated.
Regards.
AM.
-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
asterisk-users-request at lists.digium.com
Sent: Martes, 05 de Julio de 2005 09:35 p.m.
To: asterisk-users at lists.digium.com
Subject: Asterisk-Users Digest, Vol 12, Issue 33
Send Asterisk-Users mailing list submissions to
asterisk-users at lists.digium.com
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.digium.com/mailman/listinfo/asterisk-users
or, via email, send a message with subject or body 'help' to
asterisk-users-request at lists.digium.com
You can reach the person managing the list at
asterisk-users-owner at lists.digium.com
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Asterisk-Users digest..."
Today's Topics:
1. Re: Best BootRom & SIP Code for Poly600?
(Eric Wieling aka ManxPower)
2. RE: Epia C3 Linux (Michael Stahl)
3. RE: Epia C3 Linux (Wiley Siler)
4. Users handbook (Chris Mason)
5. Re: HW Capacity plan - Asterisk capacity per Xeon 3.0GHz
(Manuel Soto)
6. Re: Epia C3 Linux (JD Austin)
7. Re: Remote SIP Connections (Blake Krone)
8. RE: Epia C3 Linux (Rob Thomas)
----------------------------------------------------------------------
Message: 1
Date: Tue, 05 Jul 2005 19:25:06 -0500
From: Eric Wieling aka ManxPower <eric at fnords.org>
Subject: Re: [Asterisk-Users] Best BootRom & SIP Code for Poly600?
To: Min Hwan Chang <minchang at gmail.com>, Asterisk Users Mailing List
-
Non-Commercial Discussion <asterisk-users at lists.digium.com>
Message-ID: <42CB24E2.7060802 at fnords.org>
Content-Type: text/plain; charset=us-ascii; format=flowed
1.5.1/1.5.2 also support disabling call waiting too,
Min Hwan Chang wrote:
> Not sure if you got hte info but Bootrom 3.0.1, basically once you
> install it, you can't go back. So no going back to 2.6.1.
>
> Now iwth the SIP Image, 1.5.2 seems a little bit better than 1.4.1.
> The menus have definitely changed for the better and are more
> intuitive to use. With SIP images, you can go from 1.5.2 to 1.4.1 so
> there's no danger in trying out 1.5.2 and seeing hw you like it.
>
> Hope this helps.
> I'm currently running BootRom2.6.1 with SIP1.5.2. no problems so far.
>
> Regards,
> min
>
>
>
> On 6/10/05, Justin Ellison <justin at techadvise.com> wrote:
>
>>Hey all,
>>
>>Just getting started playing around with my Polycom 600. According to
>>the wiki, it looks like it's recommended to run BootRom 2.6.1 and SIP
>>1.4.1. Is that info still current, or is it safe to upgrade to 3.0.1
>>and 1.5.2?
>>
>>Justin
>>
>>--
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
Eric Wieling * BTEL Consulting * 504-210-3699 x2120
------------------------------
Message: 2
Date: Tue, 5 Jul 2005 20:39:15 -0400
From: "Michael Stahl" <mstahl at ocg.ca>
Subject: RE: [Asterisk-Users] Epia C3 Linux
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Message-ID: <6686D60B6BEA5846B5CEF1BD9C8AF91B1D9E at server.ocg.ca>
Content-Type: text/plain; charset="us-ascii"
Take a look at the via arena web site. Your processor may look like a
586 to the installer but may not support all of the instructions
(causing a crash). The via arena site gives instructions on how to
compile and get it installed on your processor! (I have the C3 Nehemiah
processor so I didn't need to recompile)
________________________________
From: Wiley Siler [mailto:wsiler at education2020.com]
Sent: Tuesday, July 05, 2005 7:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
I have attempted FC3, RedHat 9, Mandriva 10, Gentoo 2005.0, Gentoo
2004.3, Debian Mini, Debian woody, and Windows XP.
Nothing will install. All see the HDD. All attempt partitioning (XPO
seemingly completes), none will install the OS.
BIOS posts the correct HDD and all the installers see the HDD.
All bomb out immediately after attempting to partition with the
exception of Gentoo.
The LIVECD will allow me to set a partition table but it dies when I
attempt to apply filesystem ext3 to the root partition.
I am officially stumped.
Thanks for all the input everyone!
Wiley
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 2:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
It installed directly from the FC3 dvd, no changes...no external drivers
required
________________________________
From: Wiley Siler [mailto:wsiler at education2020.com]
Sent: Friday, July 01, 2005 2:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
Did it require any special work or did you just download the ISO for FC3
and install?
Thanks,
Wiley
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 11:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
I have Fedora Core 3 running great on an Epia mobo
________________________________
From: Wiley Siler [mailto:wsiler at education2020.com]
Sent: Friday, July 01, 2005 12:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Epia C3 Linux
Anyone know a good distro for an Epia Mobo with the C3 chip?
I have been trying to get Debian and Gentoo installed (new to me) and so
far having little luck.
Does anyone know a good install for this processor/mobo combo?
Thanks
Wiley
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050705/ba5d95
a7/attachment-0001.htm
------------------------------
Message: 3
Date: Tue, 5 Jul 2005 17:45:01 -0700
From: "Wiley Siler" <wsiler at education2020.com>
Subject: RE: [Asterisk-Users] Epia C3 Linux
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Message-ID:
<2036A1C10A032D41BE3A2AEBAF1999572B3979 at E2DSAZ.education2020.com>
Content-Type: text/plain; charset="us-ascii"
OK. Something is truly rotten in Denmark. I took the 2.5 inch drive out
altogether and setup a regular 3.5 IDE drive with a CDROM.
BIOS recognizes both. Try to install Redhat 9, it dies.
Fedora Core 3 dies, kernel panic.
How in Zeus' Red Ripe Ass did you guys get this to install?
Am I going to have to make a custom kernel?
To recap... This is a Via Mini-ITX board 800MHz Samuel 2 Processor AKA
E-Series C3 (not Eden, this one has a fan)
Thanks to all,
Wiley
PS. AstLinux bombed too...
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley
Siler
Sent: Tuesday, July 05, 2005 4:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
I have attempted FC3, RedHat 9, Mandriva 10, Gentoo 2005.0, Gentoo
2004.3, Debian Mini, Debian woody, and Windows XP.
Nothing will install. All see the HDD. All attempt partitioning (XPO
seemingly completes), none will install the OS.
BIOS posts the correct HDD and all the installers see the HDD.
All bomb out immediately after attempting to partition with the
exception of Gentoo.
The LIVECD will allow me to set a partition table but it dies when I
attempt to apply filesystem ext3 to the root partition.
I am officially stumped.
Thanks for all the input everyone!
Wiley
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 2:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
It installed directly from the FC3 dvd, no changes...no external drivers
required
________________________________
From: Wiley Siler [mailto:wsiler at education2020.com]
Sent: Friday, July 01, 2005 2:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
Did it require any special work or did you just download the ISO for FC3
and install?
Thanks,
Wiley
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 11:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
I have Fedora Core 3 running great on an Epia mobo
________________________________
From: Wiley Siler [mailto:wsiler at education2020.com]
Sent: Friday, July 01, 2005 12:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Epia C3 Linux
Anyone know a good distro for an Epia Mobo with the C3 chip?
I have been trying to get Debian and Gentoo installed (new to me) and so
far having little luck.
Does anyone know a good install for this processor/mobo combo?
Thanks
Wiley
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050705/ce0a06
81/attachment-0001.htm
------------------------------
Message: 4
Date: Tue, 05 Jul 2005 20:52:08 -0400
From: Chris Mason <lists at masonc.com>
Subject: [Asterisk-Users] Users handbook
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Message-ID: <42CB2B38.6000809 at masonc.com>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed
At the most recent project I completed I have to post a intranet web
page with instructions on using the system and phones. Asterisk is 1.07
stable and the phones are Polycom IP300, IP500, and IP600.
Has anyone done an Astersik users guide? Something non-technical but
covering most of the features an office worker would use.
If nothing exists, should we develop this as a documentation project?
After all, the greatest software is little use if the users never hear
about the features.
Chris
------------------------------
Message: 5
Date: Tue, 05 Jul 2005 20:56:12 -0400
From: Manuel Soto <mrsoto at yahoo.com>
Subject: Re: [Asterisk-Users] HW Capacity plan - Asterisk capacity per
Xeon 3.0GHz
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Message-ID: <42CB2C2C.8020109 at yahoo.com>
Content-Type: text/plain; charset=ISO-8859-1
Millions peoples requesting a meeting and keeping track of that. Peoples
call up to 4 times a year to request a meeting or to ask their request
status, VRU and Operator. The system may call back or send notifications
by SMS in order to notify request's status.
If as advised Cisco systems are in front of Asterisk, the question
change to:
What is the capacity Asterisk per Xeon processor?,
Is there any case study that may be recommended?
izo wrote:
> Write some more about your project,
> What it suppose to do ?
>
>
>
>>On 7/3/05, Manuel Soto <mrsoto at yahoo.com> wrote:
>>
>>> I'm evaluating a VRU project which has huge requirements. I'm
looking
>>>for metrics but I haven't found anything that cover my requirements
>
>
> regards
> m.
> _______________________________________________
------------------------------
Message: 6
Date: Tue, 05 Jul 2005 17:53:29 -0700
From: JD Austin <jd at twingeckos.com>
Subject: Re: [Asterisk-Users] Epia C3 Linux
To: Asterisk Users Mailing List - Non-Commercial Discussion
<asterisk-users at lists.digium.com>
Message-ID: <42CB2B89.1050205 at twingeckos.com>
Content-Type: text/plain; charset="iso-8859-1"
Tried knoppix?
Wiley Siler wrote:
> OK. Something is truly rotten in Denmark. I took the 2.5 inch drive
> out altogether and setup a regular 3.5 IDE drive with a CDROM.
>
>
>
> BIOS recognizes both. Try to install Redhat 9, it dies.
>
>
>
> Fedora Core 3 dies, kernel panic.
>
>
>
> How in Zeus' Red Ripe Ass did you guys get this to install?
>
>
>
> Am I going to have to make a custom kernel?
>
>
>
> To recap... This is a Via Mini-ITX board 800MHz Samuel 2 Processor AKA
> E-Series C3 (not Eden, this one has a fan)
>
>
>
> Thanks to all,
>
>
>
> Wiley
>
>
>
> PS. AstLinux bombed too...
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *Wiley
> Siler
> *Sent:* Tuesday, July 05, 2005 4:53 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* RE: [Asterisk-Users] Epia C3 Linux
>
>
>
> I have attempted FC3, RedHat 9, Mandriva 10, Gentoo 2005.0, Gentoo
> 2004.3, Debian Mini, Debian woody, and Windows XP.
>
>
>
> Nothing will install. All see the HDD. All attempt partitioning (XPO
> seemingly completes), none will install the OS.
>
>
>
> BIOS posts the correct HDD and all the installers see the HDD.
>
>
>
> All bomb out immediately after attempting to partition with the
> exception of Gentoo.
>
>
>
> The LIVECD will allow me to set a partition table but it dies when I
> attempt to apply filesystem ext3 to the root partition.
>
>
>
> I am officially stumped.
>
>
>
> Thanks for all the input everyone!
>
>
> Wiley
>
>
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of
> *Michael Stahl
> *Sent:* Friday, July 01, 2005 2:00 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* RE: [Asterisk-Users] Epia C3 Linux
>
>
>
> It installed directly from the FC3 dvd, no changes...no external
> drivers required
>
>
>
> ------------------------------------------------------------------------
>
> *From:* Wiley Siler [mailto:wsiler at education2020.com]
> *Sent:* Friday, July 01, 2005 2:42 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* RE: [Asterisk-Users] Epia C3 Linux
>
> Did it require any special work or did you just download the ISO for
> FC3 and install?
>
>
>
> Thanks,
>
> Wiley
>
>
>
>
>
> ------------------------------------------------------------------------
>
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of
> *Michael Stahl
> *Sent:* Friday, July 01, 2005 11:19 AM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* RE: [Asterisk-Users] Epia C3 Linux
>
>
>
> I have Fedora Core 3 running great on an Epia mobo
>
>
>
> ------------------------------------------------------------------------
>
> *From:* Wiley Siler [mailto:wsiler at education2020.com]
> *Sent:* Friday, July 01, 2005 12:54 PM
> *To:* Asterisk Users Mailing List - Non-Commercial Discussion
> *Subject:* [Asterisk-Users] Epia C3 Linux
>
> Anyone know a good distro for an Epia Mobo with the C3 chip?
>
>
>
> I have been trying to get Debian and Gentoo installed (new to me) and
> so far having little luck.
>
>
>
> Does anyone know a good install for this processor/mobo combo?
>
>
>
> Thanks
>
> Wiley
>
>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
--
JD Austin
Twin Geckos Technology Services LLC
email: jd at twingeckos.com
http://www.twingeckos.com
phone/fax: 480.288.8195
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050705/6408f5
7f/attachment-0001.htm
------------------------------
Message: 7
Date: Tue, 5 Jul 2005 19:10:48 -0600
From: Blake Krone <blakekrone at gmail.com>
Subject: [Asterisk-Users] Re: Remote SIP Connections
To: asterisk-users at lists.digium.com
Message-ID: <f4b795bf0507051810c4e09f1 at mail.gmail.com>
Content-Type: text/plain; charset=ISO-8859-1
I have gotten them to be able to connect but I am unable to hear the
other person and they can't hear me either.
What else am I missing?
On 7/5/05, Blake Krone <blakekrone at gmail.com> wrote:
> Hello all, I have my * server setup behind a Linksys WRT54G on
> Adelphia cable. I have forwarded 5060,10000-10020, and another port
> set can't remember off the top of my head but I can't seem to connect
> to the * server from any locations that are direct connects to the
> Internet. Am I missing a portset for forwarding?
>
> If I use the name service (voip.*****.com) from my home connection on
> the same LAN as the * server it will connect fine.
>
> Any ideas?
>
> TIA!
> -blake
>
------------------------------
Message: 8
Date: Wed, 6 Jul 2005 11:36:15 +1000
From: "Rob Thomas" <rob at wpm4l.com>
Subject: RE: [Asterisk-Users] Epia C3 Linux
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Message-ID: <2C7C593EA5D1A7429FBBD966CA00DE8D82E1 at fs.wpm4l.com>
Content-Type: text/plain; charset="us-ascii"
Sounds to me like bad RAM. Try running memtest (your Fedora CD has it,
just type 'memtest' at the cd boot prompt)
--Rob
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley
Siler
Sent: Wednesday, 6 July 2005 10:45 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
OK. Something is truly rotten in Denmark. I took the 2.5 inch drive out
altogether and setup a regular 3.5 IDE drive with a CDROM.
BIOS recognizes both. Try to install Redhat 9, it dies.
Fedora Core 3 dies, kernel panic.
How in Zeus' Red Ripe Ass did you guys get this to install?
Am I going to have to make a custom kernel?
To recap... This is a Via Mini-ITX board 800MHz Samuel 2 Processor AKA
E-Series C3 (not Eden, this one has a fan)
Thanks to all,
Wiley
PS. AstLinux bombed too...
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley
Siler
Sent: Tuesday, July 05, 2005 4:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
I have attempted FC3, RedHat 9, Mandriva 10, Gentoo 2005.0, Gentoo
2004.3, Debian Mini, Debian woody, and Windows XP.
Nothing will install. All see the HDD. All attempt partitioning (XPO
seemingly completes), none will install the OS.
BIOS posts the correct HDD and all the installers see the HDD.
All bomb out immediately after attempting to partition with the
exception of Gentoo.
The LIVECD will allow me to set a partition table but it dies when I
attempt to apply filesystem ext3 to the root partition.
I am officially stumped.
Thanks for all the input everyone!
Wiley
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 2:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
It installed directly from the FC3 dvd, no changes...no external drivers
required
________________________________
From: Wiley Siler [mailto:wsiler at education2020.com]
Sent: Friday, July 01, 2005 2:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
Did it require any special work or did you just download the ISO for FC3
and install?
Thanks,
Wiley
________________________________
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 11:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux
I have Fedora Core 3 running great on an Epia mobo
________________________________
From: Wiley Siler [mailto:wsiler at education2020.com]
Sent: Friday, July 01, 2005 12:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Epia C3 Linux
Anyone know a good distro for an Epia Mobo with the C3 chip?
I have been trying to get Debian and Gentoo installed (new to me) and so
far having little luck.
Does anyone know a good install for this processor/mobo combo?
Thanks
Wiley
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20050706/773152
1f/attachment.htm
------------------------------
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
End of Asterisk-Users Digest, Vol 12, Issue 33
**********************************************
More information about the asterisk-users
mailing list