[Asterisk-Users] Epia C3 Linux

[Rob Thomas]

Sounds to me like bad RAM. Try running memtest (your Fedora CD has it,
just type 'memtest' at the cd boot prompt)

 

--Rob

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley
Siler
Sent: Wednesday, 6 July 2005 10:45 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux

 

OK.  Something is truly rotten in Denmark. I took the 2.5 inch drive out
altogether and setup a regular 3.5 IDE drive with a CDROM.

 

BIOS recognizes both.  Try to install Redhat 9, it dies.

 

Fedora Core 3 dies, kernel panic.

 

How in Zeus' Red Ripe Ass did you guys get this to install?

 

Am I going to have to make a custom kernel?

 

To recap... This is a Via Mini-ITX board 800MHz Samuel 2 Processor AKA
E-Series C3 (not Eden, this one has a fan)

 

Thanks to all,

 

Wiley

 

PS. AstLinux bombed too...

 

 

 

 

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Wiley
Siler
Sent: Tuesday, July 05, 2005 4:53 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux

 

I have attempted FC3, RedHat 9, Mandriva 10, Gentoo 2005.0, Gentoo
2004.3, Debian Mini, Debian woody, and Windows XP.

 

Nothing will install.  All see the HDD.  All attempt partitioning (XPO
seemingly completes), none will install the OS.

 

BIOS posts the correct HDD and all the installers see the HDD.

 

All bomb out immediately after attempting to partition with the
exception of Gentoo.

 

The LIVECD will allow me to set a partition table but it dies when I
attempt to apply filesystem ext3 to the root partition.

 

I am officially stumped.

 

Thanks for all the input everyone!


Wiley

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 2:00 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux

 

It installed directly from the FC3 dvd, no changes...no external drivers
required

 

________________________________

From: Wiley Siler [mailto:wsiler at education2020.com] 
Sent: Friday, July 01, 2005 2:42 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux

Did it require any special work or did you just download the ISO for FC3
and install?

 

Thanks,

Wiley

 

 

________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Michael
Stahl
Sent: Friday, July 01, 2005 11:19 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Epia C3 Linux

 

I have Fedora Core 3 running great on an Epia mobo

 

________________________________

From: Wiley Siler [mailto:wsiler at education2020.com] 
Sent: Friday, July 01, 2005 12:54 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Epia C3 Linux

Anyone know a good distro for an Epia Mobo with the C3 chip?   

 

I have been trying to get Debian and Gentoo installed (new to me) and so
far having little luck.  

 

Does anyone know a good install for this processor/mobo combo?

 

Thanks

Wiley

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050705/7731521f/attachment.htm