[Asterisk-Users] Re: asterisk strips off trailing digit from incoming calls

[Bernie Ott]

Hi Ronald,

* chopping after 10 digits is fine - our number is 1234567<3 digit
ext> though so there's a total of 9 digits.

On 7/4/05, Ronald_Wiplinger <ronald_wiplinger at leadtek.com.tw> wrote:
> Bernie Ott wrote:
> 
> >There's a tiny bit of new info available:
> >
> >asterisk only strips off the trailing digit of calls coming from
> >ANALOG lines; calling from e.g. a (fully digital) gsm mobile, I get
> >the 3 digit extension as it should be.
> >
> >
> 
> Try an extension with four digits and one with two. You may see, that *
> chops all after 10 digits!!!
> 
> 
> bye
> 
> Ronald
> 
> 
> >does this ring a bell for anyone?
> >
> >On 7/3/05, no name <gurkenschaeler at gmail.com> wrote:
> >
> >
> >>so here it is, the problem that's been nagging me for the past 2 days:
> >>
> >>connected a box to my telco's NTBA <-> zap/asterisk. which works:
> >>
> >>box:/etc/asterisk# cat /proc/zaptel/1
> >>Span 1: ZTHFC1 "HFC-S PCI A ISDN card 0 [TE] layer 1 ACTIVATED (F7)" HDB3/CCS
> >>
> >>           1 ZTHFC1/0/1 Clear (In use)
> >>           2 ZTHFC1/0/2 Clear (In use)
> >>           3 ZTHFC1/0/3 HDLCFCS (In use)
> >>
> >>so then I instructed asterisk to treat this as zap interface:
> >>
> >>box:/etc/asterisk# egrep -v '(^;|^$)' zapata.conf
> >>[channels]
> >>switchtype=euroisdn
> >>signalling=bri_cpe
> >>pridialplan=unknown
> >>prilocaldialplan=unknown
> >>immediate=no
> >>priindication=outofband
> >>overlapdial=no
> >>usecallerid=yes
> >>rxgain=0.0
> >>txgain=0.0
> >>context=inbound
> >>callerid=asreceived
> >>group=1
> >>channel=1-2
> >>
> >>
> >>defined this in the dialplan:
> >>
> >>office:/etc/asterisk# tail -21 extensions.conf| egrep -v '(^;|^$)'
> >>[inbound]
> >>; my main number is "1234567",
> >>; I am using 3-digit internal extensions
> >>exten => _11234567XXX,1,Goto(internal-phones,$EXTEN:8,1)
> >>exten => _XXX,1,Goto(internal-phones,${EXTEN},1)
> >>; this acts as catch-all so dialling just the main number goes to x200
> >>exten => s,1,Answer
> >>exten => s,2,Goto(internal-phones,200,1)
> >>
> >>
> >>now when I call e.g. "1234567200" from the outside, asterisk sees this as:
> >>
> >>-- Extension '20' in context 'inbound' from '1<some other number>'
> >>does not exist.  Rejecting call on channel 0/1, span 1
> >>
> >>
> >>why does asterisk INSIST on chopping the trailing digit off the
> >>dialled number? I don't get it.
> >>
> >>please help!
> >>
> >>Bernie
> >>
> >>
> >>
> >
> >
> >
> >
> 
> 
> 


-- 
best,

Bernie