[Asterisk-Users] Sip.conf problems

[Mark Edwards]

Does the registration show up?
 try "sip show registry" at the CLI
 also try "sip debug peer sip_proxy" and post the result.
 Might be able to see what's going on there...
 mark


 On 7/1/05, David <asterisk at barnatech.com> wrote: 
> 
> Hi,
> 
> I have been trying to configure my Asterisk to use a Sip provider for
> out and incoming calls.
> I only have one user and password for connect to my sip provider.
> 
> My sip.conf is:
> 
> [general]
> ;disallow=gsm
> ;allow=ulaw
> port = 5060 ; Port to bind to
> bindaddr = 0.0.0.0 <http://0.0.0.0> ; Address to bind to
> context = default ; Default for incoming calls
> callerid=No CallID
> register => user:password at sipprovider.com
> 
> [sip_proxy]
> type=friend
> username=user
> fromuser=user
> secret=password
> host=siprovider
> dtmfmode=inband
> 
> The problem is:
> If i put in the [sip_proxy] section type=friend, incoming calls doesn't
> works. If the type is set to another value (for example peer) incoming
> calls works fine, but outgoing calls doesn't works.
> 
> What can I do?
> 
> Thanks
> David
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> 



-- 
regards,

Mark P. Edwards
TEL:+61 408 601 107
SKYPE: mark.p.edwards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050701/805baa87/attachment.htm