[Asterisk-Users] reason 24 (Call ended with Q.931 cause)

[Michael Manousos]

Hi,

Enable the driver tracing (see wrapTrace* and libTrace* in oh323.conf),
re-run and send me the output file.

Michael.


Tola Ogunsan wrote:
> Hi Michael  and Everyone
> 
> I'm trying to connect Asterisk to a CISCO AS5350 using oh323 and I'm 
> getting this error
> 
> "reason 24 (Call ended with Q.931 cause)"
> 
> I've checked the Asterisk wiki and several other resources.  Please can 
> anyone give me a hint on what the problem is I reach my wits end.  Thanks
> 
> Tola
> 
> 
> my config and debug
> 
> 
> Configuration of OpenH323 channel driver
> ------------------------------------------
> Version: 0.7.1
> Listening on address: 0.0.0.0:1720
> Gatekeeper used:  No gatekeeper
> FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF
> Supported formats in pref. order: g729<0>
> Jitter buffer limits (min/max): 20-500 ms
> TCP port range: 10000 - 20000
> UDP (RAS) port range: 10000 - 20000
> UDP (RTP) port range: 10000 - 20000
> IP Type-of-Service value: 0
> User input mode: 3
> Max number of inbound H.323 calls: 10
> Max number of outbound H.323 calls: 10
> Max number of simultaneous H.323 calls: 10
> Max call rate (ingress direction): 1.00/30
> 
> 
> Starting simple switch on 'Zap/3-1'
>   -- Executing Wait("Zap/3-1", "1") in new stack
>   -- Executing Dial("Zap/3-1", "OH323/2348033045670 at 209.3.12.49|10") in 
> new stack
>   -- H.323 call to 2348033045670 at 209.3.12.49 with codec(s) g729
> Outbound H.323 call 'ip$localhost/263'.
>   -- Called 2348033045670 at 209.3.12.49
> Call 'ip$localhost/263' cleared.
>   -- H.323 call 'ip$localhost/263' cleared, reason 24 (Call ended with 
> Q.931 cause)
> Call 'ip$localhost/263' cleared in INIT state.
>   -- OH323/L263 is busy
>   -- Hungup 'OH323/L263'
> == Everyone is busy/congested at this time (1:1/0/0)
>   -- Executing Hangup("Zap/3-1", "") in new stack
> == Spawn extension (incoming, s, 3) exited non-zero on 'Zap/3-1'
>   -- Hungup 'Zap/3-1'
> Call 'ip$localhost/263' without owner has already been cleared (2).
>   -- Starting simple switch on 'Zap/3-1'
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users