[Asterisk-Users] where to buy x100p

[Jon Gabrielson]

The digium X100P is probably fine.  What most of these people
are talking about are the X100P clones which are of varying 
qualities.  I have had no problems, but results vary.

Cheers,


Jon.

On Sunday 30 January 2005 09:42 am, dean collins wrote:
> Why does the X100P have echo and the Wildcard TDM400P have no echo?
>
>
>
> I thought the only advantage of using the TDM400P was that it used less
> interrupts than the X100P?
>
> Are there any other advantages?
>
>
>
>
>
>
>
> Cheers,
>
> Dean
>
>
>
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Remco
> Barende
> Sent: Sunday, January 30, 2005 10:08 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] where to buy x100p
>
> >> Want to buy the X100P clones I have? :)
> >
> > About the best thing that you can do to reduce Echo on the X101P and
>
> X100P
>
> > cards is to;
> >
> >
> >
> > 1. Set the following in zapata.conf;
> >
> >
> >
> > echocancel=128
> >
> > echocancelwhenbridged=no
> >
> > echotraining=800
> >
> >
> >
> > 2. Enable aggressive echo cancellation in zaptel's zconfig.h file;
> >
> >
> >
> > /*
> >
> > * Uncomment for aggressive residual echo supression under
> >
> > * MARK2 echo canceller
> >
> > */
> >
> > #define AGGRESSIVE_SUPPRESSOR
> >
> >
> >
> > I've had much better luck at killing Echo issues with the above
> >
> > suggestions, on both my P133 X101P box as well as my TE405P based PRI
> >
> > Gateways. It doesn't solve all the issues, but it does help quite
> >
> > noticeably.
>
> Thanks for the tip. However, I have been trying evening after avening to
>
>
> get the echo out by tweaking the settings. When I received the TDM11 I
>
> pulled out the X101P clone followed the example config at the Digium
> site
>
> and I was up and running without any. I don't mind trying to play around
>
>
> but wasting a lot of time on really cheap hardware was too much waste of
>
>
> time when I look back :)
>
>
>
> It's probably possible to get the echo out but it's not worth it for me
> to
>
> figure it out :)
>
>
>
>
>
> _______________________________________________
>
> Asterisk-Users mailing list
>
> Asterisk-Users at lists.digium.com
>
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> To UNSUBSCRIBE or update options visit:
>
>    http://lists.digium.com/mailman/listinfo/asterisk-users