[Asterisk-Users] FW: FAQ missing info? Asterisk@home V 0.4

[Steven Frazier]

It was released yesterday, I believe.


> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Jeff R Glassman
> Sent: Friday, January 28, 2005 2:25 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] FW: FAQ missing info? 
> Asterisk at home V 0.4
> 
> 
> I had to redue the zapata.conf
> 
> Commented it out ans added,  Also changed default Zap g0 to 
> Zap 1 (deleted Zap g0)
> 
> Where did you find Asterisk at home .4 all I see is 0.3
> 
> Jeff
> 
> [channels]
> language=en
> ;context=inbound-analog
> ;context=default
> context=from-pstn
> signalling=fxs_ks
> usecallerid=yes
> echocancel=yes
> echocancelwhenbridged=yes
> channel => 1
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of 
> dean collins
> Sent: Friday, January 28, 2005 1:47 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: [Asterisk-Users] FW: FAQ missing info? Asterisk at home V 0.4
> 
> 
> Just installed V 0.4 of asterisk at home
> 
> Programmed up 3 sip budgetone extensions, they call call each 
> other fine.
> 
> Tried to dial '9' for an outside line through an X100P to a 
> packet8 ATA but got 'all circuits are busy now'.
> 
> Here is the console output.
> 
> == Spawn extension (from-internal, h, 1) exited non-zero on 
> 'SIP/30-8d25'
>     -- Executing SetGroup("SIP/30-5dde", "30") in new stack
>     -- Executing Dial("SIP/30-5dde", "ZAP/g0/19172073420||") 
> in new stack
>   == Everyone is busy/congested at this time
>     -- Executing Macro("SIP/30-5dde", "outisbusy") in new stack
>     -- Executing Playback("SIP/30-5dde",
> "allison7/all-circuits-busy-now") in ne
> w stack
>     -- Playing 'allison7/all-circuits-busy-now' (language 'en')
>     -- Executing Playback("SIP/30-5dde", 
> "allison7/pls-try-call-later") in new s tack
>     -- Playing 'allison7/pls-try-call-later' (language 'en')
>     -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack
>     -- Executing ResetCDR("SIP/30-5dde", "w") in new stack
>     -- Executing NoCDR("SIP/30-5dde", "") in new stack
>     -- Executing Wait("SIP/30-5dde", "5") in new stack
>   == Spawn extension (macro-hangupcall, s, 3) exited non-zero 
> on 'SIP/30-5dde' i n macro 'hangupcall'
>   == Spawn extension (macro-outisbusy, s, 3) exited non-zero 
> on 'SIP/30-5dde' in  macro 'outisbusy'
>   == Spawn extension (from-internal, 919172073420, 103) 
> exited non-zero on 'SIP/ 30-5dde'
>     -- Executing Macro("SIP/30-5dde", "hangupcall") in new stack
>     -- Executing ResetCDR("SIP/30-5dde", "w") in new stack
>     -- Executing NoCDR("SIP/30-5dde", "") in new stack
>     -- Executing Wait("SIP/30-5dde", "5") in new stack
>   == Spawn extension (macro-hangupcall, s, 3) exited non-zero 
> on 'SIP/30-5dde' i n macro 'hangupcall'
>   == Spawn extension (from-internal, h, 1) exited non-zero on 
> 'SIP/30-5dde' asterisk1*CLI>
> 
> 
> 
> any thoughts?
> 
> 
> Cheers,
> Dean
> 
> 
> -----Original Message-----
> From: dean collins
> Sent: Friday, January 28, 2005 10:56 AM
> To: 'andrew'
> Subject: RE: FAQ missing info
> 
> Btw, do you need the pstn line for the X100P plugged in while 
> running the install?
> 
> Just downloaded and burning the cd now.
> 
> 
> 
> -----Original Message-----
> From: andrew [mailto:andrew_nh at yahoo.com]
> Sent: Friday, January 28, 2005 12:04 AM
> To: dean collins
> Subject: Re: FAQ missing info
> 
> What card do you have? Version 0.4 supports the  X100P automatically.
> 
> 
> --- dean collins <deancollins at users.sourceforge.net>
> wrote:
> 
> > Message body follows:
> >
> > hi, I might be missing something basic but are you
> > supposed
> > to edit zaptel file or is it supposed to do it
> > automatically?
> >
> > I've posted this question on the asterisk and amp
> > lists but no
> > one seems to be able to answer me on this.
> >
> > Cheers,
> > Dean at collins.net.pr
> >
> > --
> > This message has been sent to you, a registered 
> SourceForge.net user,
> > by another site user, through the SourceForge.net
> > site.  This message
> > has been delivered to your SourceForge.net mail
> > alias.  You may reply
> > to this message using the "Reply" feature of your
> > email client, or
> > using the messaging facility of SourceForge.net at:
> >
> https://sourceforge.net/sendmessage.php?touser=1157926
> >
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection 
> around http://mail.yahoo.com
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com 
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>