[Asterisk-Users] Stumped by BroadVoice SIP

[Manjit Riat]

I tried everything and only got that configuration with all bv servers
listed to work.

-----Original Message-----
From: Luki [mailto:lugosoft at gmail.com] 
Sent: Thursday, January 27, 2005 8:02 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Stumped by BroadVoice SIP

> And need to have all of their four servers to listen to incoming
> calls as ony one can send it in..

Why do you think that? The server you registered last with will send
incoming calls. I've registered my several lines only at their LAX
server for the last few months, and didn't miss a call. But even if
that's not the case, use permit=147.135.0.0/20 and that would cover
their four locations. In /etc/hosts you can select which BV server you
want to use. Other than that, my config is pretty much the same as
your first "broadvoice" section, except nat=no.

--Luki