[Asterisk-Users] I want to display my numbers for incoming calls when some one dials my number from any where

[Mazhar Hussain]

Hi to all again,

Thanks for your quick response

as you siad "set callerid via extensions.conf by using apps available. Look at
"show applications" via the asterisk CLI."

can i write context for incoming ,
like

(orignal)

[ukincomming]
include => defaults
exten => s,1,Wait,1                    
exten => s,2,Answer
exten => s,3,DigitTimeout,5            
exten => s,4,ResponseTimeout,10 



exten => _55.,1,Answer
exten => _55.,2,Macro(record-enable)
exten => _55.,3,Queue(dave|t|||300)
exten => _55.,4,PlayBack(vm-goodbye)
exten => _55.,5,Hangup

[macro-record-enable] 
exten => s,1,AGI(set-timestamp.agi) 
exten => s,2,SetVar(CALLFILENAME=${timestamp}-${MACRO_EXTEN}) 
exten => s,3,Monitor(wav,${CALLFILENAME})




changed

[ukincomming]
include => defaults
exten => s,1,Wait,1                    
exten => s,2,Answer
exten => s,3,DigitTimeout,5            
exten => s,4,ResponseTimeout,10 

exten => _55.,1,Answer
exten => _55.,2,Macro(record-enable)
exten => _55.,3,SetCallerID(${CALLERIDNUM})  ;i have added the following line
exten => _55.,4,Queue(dave|t|||300)
exten => _55.,5,PlayBack(vm-goodbye)
exten => _55.,6,Hangup


will it work and will display my number dialded any one. or can u
please let me know example context for this,

Cheers,
Mazhar Hussain


On Fri, 28 Jan 2005 01:22:55 -0600, Steven Critchfield
<critch at basesys.com> wrote:
> On Thu, 2005-01-27 at 23:15 -0800, Mazhar Hussain wrote:
> > Hi to all,
> >
> > I and using asterisk with following
> >
> > 1. TDM400p card with four FXS modules,
> > So there are four analog phone lines on four zap channels,
> > My setup is working fine.
> > And version is like such
> > Asterisk CVS-v1-0-11/27/04-20:48:45
> >
> > But when some dials form his number (suppose abc) to my number
> > (suppose xxxx) I get abc number on my analog phone, but now I have
> > purchased more than one numbers suppose xxxxxxx , yyyyyyyy ,zzzzzzzzz
> > . I want to change settings in extension.con or some where  so that
> > when some one (from any number) dials xxxxx  there should be xxxxx
> > number on analog phone and similarly if some one dials yyyyyyy from
> > any number there should be  yyyyy on my analog phones
> 
> On analog lines, you can't specify callerid to the PSTN. You can for
> internal dialing. Check out the zap conf file in /etc/asterisk/. You can
> also set callerid via extensions.conf by using apps available. Look at
> "show applications" via the asterisk CLI.
> 
> --
> Steven Critchfield <critch at basesys.com>
> 
>