[Asterisk-Users] Linux Bridge + QoS Shaper HOWTO available

[Jasper Spaans]

That could be nice, however, there could be more traffic using tos
0x10. I wouldn't bet on using it in a config like this.

On Thu, 27 Jan 2005 15:32:44 -0800, Mike Machado <mike at cheapnet.net> wrote:
> You could also change the tos setting in sip.conf and use a rule similar
> to the one found in the LARTC. This is a bit easier, and perhaps cleaner
> than matching many ports.
> 
> # tc filter add dev eth0 parent 1:0 prio 10 u32 \
>      match ip tos 0x10 0xff \
>      flowid 1:4
> 
> That would match TOS of 0x10, which is the "Low Delay" bit enabled. You
> should change this to link to your appropriate flowid and parent node,
> of course.
> 
> 
> On Thu, 2005-01-27 at 16:39 -0600, rsenykoff at harrislogic.com wrote:
> >
> > <snip>
> > Does your script work for SIP too? Only for IAX?
> >
> > I'd like to put two of your bridges in my setup – one between the
> > local LAN and the net, and the other at our branch office between the
> > LAN and WAN there.
> >
> > But I need to be able to allow for sip to be QOSed, as we currently
> > have an asterisk server at the remote office, and sip clients here.
> > </snip>
> >
> > SIP can easily be added. I am placing IAX2 into high priority by port.
> > You could do this with SIP as well. Add port 5060 and 10000-20000 to
> > the high priority queue. This HOWTO is meant to be read before
> > implementing it. My example includes shaping video and Citrix, which
> > you may not be interested in doing. In that case you'll need to remove
> > those priority levels.
> >
> > -Ron 
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 


-- 
Jasper Spaans                                       http://jsp.vs19.net/