[Asterisk-Users] Polycom IP600 stuck at "Running App = sip.ld"(was: Re: Polycom 1.4.1 firmware for IP500/IP600)

[Michael Devenijn]

Did you try to boot without lan just the power ...

I've had this same problem to and rebooted the device without lan
connection



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of
Louis-David Mitterrand
Sent: woensdag 26 januari 2005 11:36
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Polycom IP600 stuck at "Running App =
sip.ld"(was: Re: Polycom 1.4.1 firmware for IP500/IP600)

On Tue, Jan 25, 2005 at 10:00:42PM -0500, Robert Augustyn wrote:
> If you have it, can I get a copy please, or possibly can you send it
to the
> keeper of http://www.freedomphones.net/polycom/files/ 
> I am looking for the latest boot image too.

1) I have the 1.4.1 firmware. To whom should I send the files? There is
no contact info in this web site.


2) Now I am having a problem with my IP600 test unit:

While performing tests on the Polycom IP600 I changed a configuration
item and during reboot the phone stopped at the "Running App = sip.ld"
stage and seems stuck there.

I reinitialized all configuration files to their defaults from the zip
files you sent me, to no avail. Plugging/unplugging the phone does not
help as it starts and then stops booting at the same stage, while the
message waiting indicator stays solid red (whereas previously it would
flash continuously until full startup).

Bootrom version: 2.6.1
Sip.ld version:  1.4.1.0040
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users