[Asterisk-Users] UPS for Asterisk

[Remco Barende]

:)

Get an APC power switch, hook it up to a network in the vicinity of your * 
box and make sure you can reach it from the outside. If the box fails to 
boot you can remotely power cycle it.

If you need a rocksolid solution have a look at astlinux that can boot * 
from a compact flash card in read only mode which makes it very hard to 
break :)


On Wed, 26 Jan 2005, Shoval Tomer wrote:

> OK.
> You're wearing me out.
>
> IF linux boots Asterisk can surely load automatically.
>
> What if linux DOES NOT boot after a power failure?
>
>
>
> -----Original Message-----
> From: Brian Capouch [mailto:brianc at palaver.net]
> Sent: Tuesday, January 25, 2005 10:52 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [Asterisk-Users] UPS for Asterisk
>
> David Brodbeck wrote:
>
>>
>>
>> It comes back up on its own, of course.
>>
>>
>>> If it just works, you have something asterisk without UPS can't give
>>> you.
>>
>>
>> Really?  Surely Asterisk can be configured to start itself up when the
>> system boots.
>
> Absolutely.
>
> Where did the notion ever come from that it could not?
>
> B.
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>