[Asterisk-Users] OT: pinout for"standard"telephoneheadsetrequired.?

[Mike Dewey]

Nabeel,
   I would be interested in seeing your schematic for the headset to 2.5 mm 
adaptor.  On a side note ...  anyone know if the Polycom headset jack uses 
the same pinouts???

thanks
mike
On Tuesday 25 January 2005 07:16 am, Nabeel Jafferali wrote:
> Mike Dent wrote:
> > Neither, the one I am looking for is the tiny (similar to RJ11) plug.
> > Which are used on telephony headsets.
>
> The RJ10. Well,
> http://www.mml.uni-hannover.de/einhorn/headset/index_e.html has the
> Cisco 7960 headset jack first. Then, later they have the handset jack,
> which I am pretty sure is the same as a "standard" telephone headset
> jack.
>
> You could try both - that's what I did when building my single plug
> 2.5mm (cellphone) headset to Cisco 7960 headset "adaptor".
>
> --
> Nabeel Jafferali
> Tel: +1 (416) 628-9342  Toronto
>      +1 (646) 225-7426  New York
> FWD: 46990
> Email/MSN: nabeel<at>jafferali.net
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
       |- - - - - - - - - - - - - - - - - - - -|
      |-            Mike Dewey    of           -|
     |=   All Technologies Unlimited, Inc       =|
      |-         phone: 303.667.0357           -|
       |- e-mail: mdewey at alltechunlimited.com -|