[Asterisk-Users] OT: pinout for "standard" telephoneheadsetrequired.?

[Asterisk]

We found that the plantronics headet that we used to have for the 
Meridian phones did not work in the cisco headset jack. We had to cut 
the ends off and rewire them, which we worked out by trial and error.

You can buy plantronics for cisco phones as well.

Julian.

Florian Overkamp wrote:
> Hi, 
> 
> 
>>-----Original Message-----
>>this is the pinout of the handset jack of the ciso phone, which again
>>is different to the
>>headset pinout of the cisco.
>>
>>If I had an old pots headset, I could smash^h^h^h^h dismantle it and
>>trace the wires
>>to mic and earpiece but I dont have one I can take apart.
> 
> 
> Yes, and I just unplugged handsets from three different non-cisco phones and
> plugged them into the handset jack of a 7960, it works. You may consider the
> pin layout from that webpage to be 'standard'.
> 
> Florian
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
>