[Asterisk-Users] AVM Fritz crash

[Thomas Niesel]

On Mon, Jan 24, 2005 at 04:31:33PM +0000, Steve Hill wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
> 
> 
> Not strictly Asterisk related, but I'm trying to get an AVM Fritz! card to 
> work with Asterisk on a Fedora Core 3 box.  I've grabbed the official AVM 
> Fritz CAPI driver from the AVM website and compiled against the current 
> kernel.  However, as soon as I modprobe it I get:
> CAPI Subsystem Rev 1.1.2.8
> fcpci: module license 'Proprietary' taints kernel.
> fcpci: AVM FRITZ!Card PCI driver, revision 0.6.2
> fcpci: (fcpci built on Jan 24 2005 at 13:51:46)
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 11 (level, low) -> IRQ 11
> fcpci: AVM FRITZ!Card PCI found: port 0x1c00, irq 11
> fcpci: Loading...
> fcpci: Driver 'fcpci' attached to stack. (152)
> Unable to handle kernel paging request at virtual address ffffff00
>  printing eip:
> e0bbe503
> *pde = 00002067
> Oops: 0000 [#1]
> Modules linked in: fcpci(U) kernelcapi nfsd exportfs lockd parport_pc lp 
> parport md5 ipv6 autofs4 sunrpc video button battery ac ohci_hcd 
> i2c_amd756 i2c_core crc_ccitt isdn slhc r8169 3c59x floppy dm_snapshot 
> dm_zero dm_mirror ext3 jbd dm_mod
> CPU:    0
> EIP:    0060:[<e0bbe503>]    Tainted: P      VLI
> EFLAGS: 00010217   (2.6.10-1.741_FC3)
> EIP is at memcpy+0x13/0x30 [fcpci]
> eax: e0bbee4f   ebx: dc1a403c   ecx: 382efb93   edx: e0c14e54
> esi: ffffff00   edi: e0bbe45e   ebp: dbb80e90   esp: dbb80e88
> ds: 007b   es: 007b   ss: 0068
> Process modprobe (pid: 3995, threadinfo=dbb80000 task=db4bae50)
> Stack: d995b884 da7224cc 00000000 e0c0d389 e0bbe45e ffffff00 e0bbee4f 
> 00001c02
>        00001c02 00000246 00000014 dc1a4004 dc1a403c dc1a4004 ffffffed 
> e0c0d64c
>        dc1a4004 e0c0c53f dc1a4058 dc1a4004 e0c0c96d dfc1b000 dfc1b000 
> ffffffed
> Call Trace:
>  [<e0c0d389>] lock_init+0x3e/0x5b [fcpci]
>  [<e0bbe45e>] CA_MSEC+0xe/0x10 [fcpci]
>  [<e0bbee4f>] Wait+0x2f/0x40 [fcpci]
>  [<e0c0d64c>] table_init+0x2c/0x3e [fcpci]
>  [<e0c0c53f>] start+0x13/0xa5 [fcpci]
>  [<e0c0c96d>] add_card+0xb4/0x165 [fcpci]
>  [<e0c0c1b2>] fritz_probe+0x9c/0xee [fcpci]
>  [<c01d173a>] kobject_hotplug+0x2f7/0x2ff
>  [<c01da692>] pci_device_probe_static+0x2a/0x3d
>  [<c01da6c0>] __pci_device_probe+0x1b/0x2c
>  [<c01da6ec>] pci_device_probe+0x1b/0x2d
>  [<c0238de5>] driver_probe_device+0x30/0x4d
>  [<c0238ead>] driver_attach+0x37/0x66
>  [<c0239264>] bus_add_driver+0x7a/0xa4
>  [<c02396f0>] driver_register+0x51/0x58
>  [<e08580b2>] fritz_init+0xb2/0xd3 [fcpci]
>  [<c01da8a4>] pci_register_driver+0x8b/0x9e
>  [<e08580bf>] fritz_init+0xbf/0xd3 [fcpci]
>  [<c0135965>] sys_init_module+0x1c4/0x294
>  [<c010336b>] syscall_call+0x7/0xb
> Code: 10 c3 e0 ff 50 58 c9 c3 55 89 e5 5d c3 8d 74 26 00 8d bc 27 00 00 00 
> 00 55 89 e5 8b 45 10 57 89 c1 56 c1 e9 02 8b 75 0c 8b 7d 08 <f3> a5 a8 02 
> 74 02 66 a5 a8 01 74 01 a4 5e 5f 8b 45 08 5d c3 89
> 
> Does anyone have any suggestions?
> 
Quick shot:
SMP, HT?
IRQ?
Try other slot.
Do you modprobe/insmod the module by hand or via <capiinit start>?

-- 
Tho/\/\as