[Asterisk-Users] TDM400P Sync source

[Michael Løjtnant]

Hi,

I am trying to track down the reason to my  problems with sending and reciving fax with my PRI and 2 TDM400P Cards:

PSTN <-> PRI (E100P) <-> * <-> TDM400P <-> Fax Machine

I have used Zapbarge to listen to the data stream, but I can't say if it really have some time slips - fax kinda noisy in itself.

Using the zttool i saw the Sync source for the TDM are "internally" - what does that mean? Are they using an "on-board" source, or using the PRI (which is configured to use the telco as sync source).

The zttool reports this for the E100P:  Sync Source:        Digium Wildcard E100P E1/PRA C
For the TDM400P cards it reports : Sync Source:        Internally clocked 


Is there a way to specify which source the TDM cards should use?




Div system info:
System:
SuperMicro with P4 2.53GHz
512 MB Ram
3Ware IDE Raid Cont. (Running Raid 5)
1 x E100P
2 x TDM400

Kernel-2.6.8.1 (No ACPI)
Asterisk, Libpri and zaptel is from stable 1.0.2 release

zaptel.conf

span=1,1,0,ccs,hdb3,crc4
bchan=1-15,17-31
dchan=16

fxoks=32,33,36-39
fxsks=34,35

cat /proc/interrupts 
           CPU0       
  0:  954710104          XT-PIC  timer
  1:         20          XT-PIC  i8042
  2:          0          XT-PIC  cascade
  5:  954609651          XT-PIC  wctdm
  7:  954739525          XT-PIC  wctdm
 10:    2858318          XT-PIC  eth1
 11:   32640181          XT-PIC  eth0
 12:        214          XT-PIC  i8042
 14:  954602423          XT-PIC  t1xxp
 15:    5550321          XT-PIC  3ware Storage Controller
NMI:          0 
LOC:  954781513 
ERR:          0
MIS:          0


-- 
Med venlig hilsen / Best regards

Michael Løjtnant - Systems Engineer
ZyXEL Communications A/S
Columbusvej 5 - 2860 Søborg
Tel (+45) 3955 0700 - Fax (+45) 3955 0707