[Asterisk-Users] Power Alarm Error - Help

[Michael K. Rodriguez User]

I had a similar problem with power.
I connected Asterisk to a Belkin UPS 1200VA and the the server would boot up
and asterisk would load but the T1s on the Quad T1 card failed to come up. I
placed a loop on the card and still no change. Finally, I removed the UPS
and the T1s came up.

Do know if this will help you, but the T1 card seems to be delicate with
power.

-Michael


On 1/23/05 10:31 AM, "timebandit001 at gmail.com" <timebandit001 at gmail.com>
wrote:

>> I have been getting the following message in Asterisk and it shuts Asterisk
>> down, needing a reboot.
>> 
>> "Power alarm on Module 2"
>> 
>> I have
>> (1) TDM400P with (2) FXS & (2) FXO cards
>> (1) X100P card
>> 
>> Any ideas?
> Since nobody answered, I'll guess something :)
> 
> Did you plug the power on the TDM400P ?  since you have FXS ports, you
> need to plug it in
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users