[Asterisk-Users] Cisco ATA186 and Asterisk dialplan

[Dan]

Hi,

----- Original Message ----- 
From: "Adi Linden" <adil at adis.on.ca>


>> I have a Cisco ATA186 connected to an Asterisk Server (SIP)
>> The dialplan uses 1XX for local extensions and XXXXXXX for
>> external numbers, where the first digit is always different than 1.
>> In this moment, when I dial 123 for example, ATA waits till
>> timeout before dialing that number. The same for the longer one.
>> How can I do to make it dial imediately when 3 digits starting with
>> 1 are received?
>
> You need to modify the DialPlan parameter. It is well described in the
> config file:
>
> # ============================ Dial Plan Parameters 
> ===========================
> # -----------------------------------------------------------------------------
> #   Parameter:  DialPlan
> # Access Code:  926
>..
> #                    "911|1>#.r9t3.t5-|0t411t9-"
> #
> #               if 911 entered, it will be sent out immediately.
> #               if 14088713344 is entred, after 3 seconds, it will
> #               be sent out but if another digit is entered (say
> #               140887133445, the timeout chaned to 5 seconds).
> #               if 0 is entered, after 4 seconds, it will be send out.
> #               if 011 is entered, the time out changed to 9 seconds.
>
> DialPlan:*St4-|#St4-|911|1>#t8.r9t2-|0>#t811.rat4-|^1t4>#.-
>

Thank you.
Is working now.

Best regards,
Dan