[Asterisk-Users] Need help configuring TDM10B / X100P Cards

[David J Carter]

Mike

How many modules on the TDM card?

When you mention the FXS(green module) I assume only one.

if so then fxoks=2-5 should be fxoks=2.

Regards

Dave
  -----Original Message-----
  From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Mike Chapman
  Sent: 22 January 2005 13:10
  To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
  Subject: [Asterisk-Users] Need help configuring TDM10B / X100P Cards


  Hi,

  Would someone assist me with the configuration of my TMD10B and X100P
cards? I would ask Digium but my support was good for only one install...( I
had to rebuild my * box). I wrote down the configuration but I must have
made a mistake somewhere.  I have followed the instructions on the Digium
site but I must be missing something. Here's the config (snippets) I've been
attempting to use:

  /etc/zaptel.conf
  fxsks=1 # X100P
  fxoks=2-5 the FXS(green) module is closest to the bracket if you are
looking at the side of the card with all of the electronic components.
  defaultzone=us
  loadzone=us

  /etc/asterisk/zapata.conf

  echocancel=yes ; You can set this to 32, 64, or 128, tweak to your needs.
  echocancelwhenbridged=yes
  echotraining=400 ; Asterisk trains to the beginning of the call, number is
in milliseconds
  callerid=asreceived
  signalling=fxs_ks group=1
  context=incoming ; Points to the incoming context of your extensions.conf
  channel => 1

  signalling=fxo_ks
  callerid=
  group=2
  context=default
  channel=> 2-5

  When I run ztcfg -v I get an error message which says ZT_CHANCONFIG failed
on channel 2: invalid argument. Did you forget that FXS interfaces are
configured with FXO signalling and that FXO interfaces use FXS signalling?

  What am I doing wrong?

  Thanks,

  Mike
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050122/470788cc/attachment.htm