[Asterisk-Users] zaphfc no callerid incoming to SIP phone but visible in logfile

[Michiel van Baak]

> ----- Originele Bericht -----
> Van: Jens
> Aan: Asterisk Users Mailing List - Non-Commercial Discussion 
> Datum: Friday, 21 January 2005, 23:13 
> Onderwerp: Re: [Asterisk-Users] zaphfc no callerid incoming to SIP phone but visible in logfile
> 
> 
> > Jens, thanks for the feedback.
> 
> No problem - but I think I didnt help.
> 
> > >>Ive added a ZAPHFC card to my CAPI based system. Calls coming in via
> > >>ZAPHFC do not forward the caller id to the SIP phones. Calls coming in
> > >>via CAPI do forward the caller id to the SIP phones.
> > 
> > > I think you didnt set usecallerid=yes in your zapata.conf? 
> > 
> > Added it, rebooted, no change. (Before, I just had pritrustusercid = 
> > yes, only.)
> 
> so I also had this problem that both of those methods didnt work.
> Another method to set the callerid is to insert a line like this into
> the zapata.conf within the related section. 
> setcallerid =

That did the trick for me. Thnx

> 
> Normally the way I described before works for me using asterisk 1.02
> with bristuff 0.2 on different machines also on one SMP-machine with one
> or more HFC-cards in TE- and NT-mode. I also had problems as mentioned
> by Michiel when I call ztcfg more than once after loading the modules.
> But I think this problem is known because I read about it on some pages.
> 

Yes, its a known problem. Both when calling ztcfg more then once while the module is loaded and the oops when unloading zaphfc module on SMP-machines.
It was that unstable here I bought 2 fritz cards and all is working smooth now with the default 2.6.10 i4l driver. Even the echo and delays we had with the HFC card under i4l dont show up on the fritz.
Too bad I have a pile of HFC cards now ;)
Maybe I can use them in non SMP machines for customers...

Thnx again for all the help
> 
> Jens