[Asterisk-Users] problem with TE-405P

[matthew at txlink.net]

Hello, I have two TE-405Ps that I am having trouble with.

I'm using an Intel 865 motherboard with a Celeron D processor.  Kernel 2.4.26,
Slackware 10.0. 

my /proc/interrupts:

          CPU0       
  0:     172317          XT-PIC  timer
  1:          2          XT-PIC  keyboard
  2:          0          XT-PIC  cascade
  5:       2003          XT-PIC  eth0
  8:          1          XT-PIC  rtc
  9:          0          XT-PIC  t4xxp
 14:       2859          XT-PIC  ide0
NMI:          0 
ERR:          0

my lspci:

00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface
(rev 02)
00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device
(rev 02)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge
(rev c2)
00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage
Controller (rev 02)
00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
01:01.0 Bridge: Xilinx Corporation: Unknown device 0214 (rev 01)
01:08.0 Ethernet controller: Intel Corp. 82562EZ 10/100 Ethernet Controller (rev
01)

Herein lies the first strange problem.  Usually the 405ps show up as device
0314.  It is coded that way in the zap driver.  Both 405ps I have show up as
0214.  I have changed the zap driver to 0214 to make it work.

Yesterday I had the card working, but overnight it died.  The card does the
knight rider scan when the machine is booting.  Once the module is configured
it is supposed to go to the slow blinking red lights since there are no PRIs
plugged in... but instead, the lights go out completely.  If you hook up PRIs,
they do not respond.  

What could be wrong?

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.