[Asterisk-Users] Outbound Dial via SIP

[kurt x]

That was the ticket.  The Extra ")" was the problem.

Thanks Sean.

Kurt

On Tue, 18 Jan 2005 08:13:31 -0800, Sean Kennedy <skennedy at tpno.org> wrote:
> kurt x wrote:
> 
> >What I am trying to do is the following:  A call is sent to the * box
> >via a SIP invite.  The * box answers via an IVR menu system with "
> >Enter the extension you want to dial" so I enter in my 5 digit
> >extension and get the below message.
> >
> >Jan 18 10:10:03 WARNING[-1380238416]: channel.c:1860 ast_request: No
> >channel type registered for 'SIP)'
> >Jan 18 10:10:03 NOTICE[-1380238416]: app_dial.c:696 dial_exec: Unable
> >to create channel of type 'SIP)'
> >Jan 18 10:10:05 WARNING[-1115923536]: chan_sip.c:673 retrans_pkt:
> >Maximum retries exceeded on call
> >MGC12320050118100959228289-68802635075-54444D000001F742219B3341ED26C644 at 66.33.1
> >for seqno 1 (Non-critical Response)
> >
> >My extension.conf outbound dial peer:
> >
> >[outbound]
> >exten => _124XX,1,Dial(SIP)/${EXTEN:1}@outbound)
> >exten => _124XX,2,Playback(invalid)
> >exten => _124XX,3,Hangup
> >
> >My sip.conf
> >
> >[outbound]
> >type=peer
> >host=192.168.1.1
> >
> >What the * needs to do is receive the call via SIP and then send it
> >out dialed extension via SIP to an another IP PBX.  SO the * does not
> >need to register to a server just blindly send a SIP invite to the ip
> >address in the SIP.CONF file:  192.168.1.1
> >
> >Any help would be appricated
> >
> >Kurt
> >
> 
> exten => _124XX,1,Dial(SIP)/${EXTEN:1}@outbound)
> 
> This is your problem.  It should be
> 
> exten => _124XX,1,Dial(SIP/${EXTEN}:1}@outbound)
> 
> There might be further syntax errors, this is only off the top of my head, but the most glaring error that I could see was the ) after SIP.
> 
> Sean
> 
>