[Asterisk-Users] ZAP/PRI Error: channel reported in use
hanson
hanson at nextmobile.at
Mon Jan 17 14:03:38 MST 2005
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
I have encountered an similar error with my E1 card. I would propose
to check your timing source!
Chris A. Icide wrote:
| I have a system with two 4 port T1 cards, with 5 PRI's configured.
| Each PRI is configured as an individual PRI and belongs to it's
| own group (groups 1-5)
|
| This system is handling roll-over from another system, where any
| error in processing the call on that system results in it being
| sent here. This mainly results in all calls resulting in a busy
| being sent for retry here. I then try the groups in order, 1-5.
| However, spans 2,3, and 4 are erroring out with a strange error.
| They are configured the same as circuits 1 and 5, and the carrier
| claims they are all configured the same.
|
| The error I'm concerned with it this:
|
| -- Forcing restart of channel 0/21 on span 2 since channel reported
| in use
|
| See error in context below.
|
| -- Executing Dial("IAX2/unipoint-4 at unipoint-4/1", "Zap/G1/5551212")
| in new stack -- Called G1/5551212 -- Channel 0/23, span 1 got
| hangup -- Zap/23-1 is busy -- Hungup 'Zap/23-1' == Everyone is
| busy/congested at this time (1:1/0/0) -- Executing
| Dial("IAX2/unipoint-4 at unipoint-4/1", "Zap/G2/5551212") in new stack
| -- Called G2/5551212 -- Channel 0/21, span 2 got hangup -- Forcing
| restart of channel 0/21 on span 2 since channel reported in use --
| Hungup 'Zap/45-1' == No one is available to answer at this time
| (1:0/0/0) -- Executing Goto("IAX2/unipoint-4 at unipoint-4/1", "203")
| in new stack -- Goto (unipoint,5551212,203) -- Executing
| Dial("IAX2/unipoint-4 at unipoint-4/1", "Zap/G3/5551212") in new stack
| -- Called G3/5551212 -- Channel 0/21, span 3 got hangup -- Forcing
| restart of channel 0/21 on span 3 since channel reported in use --
| Hungup 'Zap/69-1' == No one is available to answer at this time
| (1:0/0/0) -- Executing Goto("IAX2/unipoint-4 at unipoint-4/1", "304")
| in new stack -- Goto (unipoint,5551212,304) -- Executing
| Dial("IAX2/unipoint-4 at unipoint-4/1", "Zap/G4/5551212") in new stack
| -- Called G4/5551212 -- Channel 0/21, span 4 got hangup -- Forcing
| restart of channel 0/21 on span 4 since channel reported in use --
| Hungup 'Zap/93-1' == No one is available to answer at this time
| (1:0/0/0) -- Executing Goto("IAX2/unipoint-4 at unipoint-4/1", "405")
| in new stack -- Goto (unipoint,5551212,405) -- Executing
| Dial("IAX2/unipoint-4 at unipoint-4/1", "Zap/G5/5551212") in new stack
| -- Called G5/5551212 -- Channel 0/22, span 5 got hangup --
| Zap/118-1 is busy -- Hungup 'Zap/118-1' == Everyone is
| busy/congested at this time (1:1/0/0) -- Executing
| Hangup("IAX2/unipoint-4 at unipoint-4/1", "") in new stack
|
| _______________________________________________ Asterisk-Users
| mailing list Asterisk-Users at lists.digium.com
| http://lists.digium.com/mailman/listinfo/asterisk-users To
| UNSUBSCRIBE or update options visit:
| http://lists.digium.com/mailman/listinfo/asterisk-users
|
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (MingW32)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFB7Cgn75fQW47llQgRAnMbAJ4ibO2d36TFTcjCNVWjTl4dyTfm9ACgk/af
M2E/MFREkqkk57sAe/j1J/E=
=LI0b
-----END PGP SIGNATURE-----
More information about the asterisk-users
mailing list