[Asterisk-Users] DIAX 0.9.9g more features and higher stability

[Denis Galvão - iSolve]

Two more information:

1. I've played with all suported codecs, same problems for all of them.

2. After aprox. 1 minute of conversation the delay problem doesn't occur, or 
better, it is very less(some miliseconds) than the begining(10 seconds) of 
a call.

Any ideas!?

Denis.


Em Seg 17 Jan 2005 11:51, Denis Galvão - iSolve escreveu:
> Hi Dan, Steve, Michael, Bruno and others.
>
> I will try to describe my VoIP environment below:
>
> SERVER:
> - FC1 with Asterisk CVS-v1-0-11/04/04-23:47:17
> - iax.conf
> [general]
> bindport = 4569
> bindaddr = 0.0.0.0
> delayreject=yes
> disallow=all
> allow=ulaw
> allow=alaw
> allow=gsm
> tos=lowdelay
> jitterbuffer=no
> dropcount=2
> maxjitterbuffer=100
> maxexccessbuffer=100
> mailboxdetail=yes
>
> [1001]
> callerid="Ramal 1001" <1001>
> context=from-internal
> host=dynamic
> mailbox=1001
> notransfer=yes
> port=4569
> secret=****
> type=friend
> username=1001
>
> [1002]
> callerid="Ramal 1002" <1002>
> context=from-internal
> host=dynamic
> mailbox=1002
> notransfer=yes
> port=4569
> secret=****
> type=friend
> username=1002
>
> CLIENT 1001:
> - Windows XP
> - DIAX 0.9.9g
> - Firefly 1.9.6 Build 3944
> - USB Phone NTP200E - Compatible with ATCOM USB Phone
> - AMD 1.8Ghz with 256Mb
>
> CLIENT 1002:
> - Windows XP
> - DIAX 0.9.9g
> - Firefly 1.9.6 Build 3944
> - USB Phone NTP200E - Compatible with ATCOM USB Phone
> - AMD 1.66Ghz with 256Mb
>
>
> ADDITIONAL INFORMATION
> - All machines are in the same network(192.168.*.*) no firewall in the
> middle;
> - With Firefly I have a VERY GOOD conversation, without any delay;
> - With DIAX I have a one way delay of 10 sec. Only the person who recieve
> the call get the delay, the person who make the call listen without
> problems;
> - Firefly in one side and DIAX in the other side, same delay problem;
> - No problems with SIP;
> - No problems(delay) with Linux clients runnig IaxComm 0.99pre11;
> - Same problem with DIAX oldest DLL;
> - Ping from clients to server: 0% packet loss and < 1ms;
> - No problems calling PSTN, Voicemail, etc, just between DIAX clients;
>
> If you need something else, let me know!
>
> Thanks for your help!
>
> Denis Galvão.
>
> Em Dom 16 Jan 2005 19:52, Steve Kann escreveu:
> > On Jan 16, 2005, at 2:53 PM, Dan wrote:
> > > Hi Steve,
> > >
> > > ----- Original Message ----- From: "Steve Kann" <stevek at stevek.com>
> > >
> > >> On Jan 14, 2005, at 2:03 PM, Dan wrote:
> > >>> Hi,
> > >>>
> > >>> \> Em Sex 14 Jan 2005 16:43, Dan escreveu:
> > >>>>> > I dont have problems when calling PSTN extensions, and calling
> > >>>>> > VoceMail, EchoTest, etc. The problem is related with the
> > >>>>>
> > >>>>> conversation
> > >>>>>
> > >>>>> > between two DIAX Softphones.
> > >>>>>
> > >>>>> Between 2 DIAX phone and the delay is in one direction only??
> > >>>>
> > >>>> Yes. One direction only... Just who make the call get the delay.
> > >>>
> > >>> Then try
> > >>> jitterbuffer=no
> > >>> in iax.conf
> > >>> to see if it solves this issue.
> > >>
> > >> Dan et. al,
> > >> I think this might be a problem with native transfers, and needing
> > >> to reset the jitterbuffer history when this happens, or something
> > >> like this..
> > >> -SteveK
> > >
> > > But I have tried and I do don't have this problem here...
> > > What can I do to make this happen here?
> >
> > I don't know...
> >
> > Maybe if we could get a packet trace of the situation that causes the
> > problem?
> >
> > Maybe try notransfer or whatever the iax.conf parameter is, and see if
> > that changes things.  If it does, it points towards this being the
> > problem.
> >
> > If the delay goes down after a couple of minutes after the transfer,
> > this could be the problem.  If it doesn't, there's something else
> > really wrong..
> >
> > (I'm assuming you're using the new JB code here..).  Also, if you're
> > using the new JB code, you should implement the stuff to get the
> > network stats, so we can see if calculated jitter is substantially
> > higher..)
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users

-- 
D e n i s   G a l v ã o
iSolve - Solve Is Our Business
Av. Candido de Abreu, 526 1206B
CEP: 80530-000 - Curitiba - PR
+55 41 252-2977
http://www.isolve.com.br