[Asterisk-Users] Bristuff 0.20RC3 loses connectivity after short line interruption?

[Michiel van Baak]

Tomorrow (monday) I will post my kernel oops messages together with my dmesg to Junghanns.
I have noticed I cannot use the init.d script more then 1 or 2 times before the server dies completely. Prolly cause of the half unloaded module.

Remco: I have simply connected the 2 NT1 boxes with a cat5 utp cable to the 2 HFC cards.
There were cables in it that went into our very old Panasonic box. Simply unplugging those  and repatching them on the pathpanel so they are directly connected did the trick here. We have been using this setup for a couple of business days now and all worked ok. 

Let me know if this works for you too.

Michiel van Baak
Terrazur


> ----- Originele Bericht -----
> Van: Remco Barende
> Aan: michiel at terrazur.nl, Asterisk Users Mailing List - Non-Commercial Discussion 
> Datum: Friday, 14 January 2005, 20:06 
> Onderwerp: RE: Re: [Asterisk-Users] Bristuff 0.20RC3 loses connectivity after short line interruption?
> 
> Weird, I havent actually tried that, that may be part of my problem too.
> 
> If i disconnect the line from the NT1 bristuff will not reconnect on every 
> occasion. Disconnecting the cord between the Nt1 and the HFC-S card makes 
> it lose connectivity occasionally. But I guess either way, the modules 
> should restore the line connection.
> 
> Does anybody know if any of the Junghanns developers follow this list or 
> should we e-mail them a bug report? (I briefly looked through the tarball 
> but didnt see an e-mail address but I didnt browse the sources).
> 
> Groetjes,
> Remco
> 
> P.S. Michiel : Do you have any experience connecting KPN PRI to *? I need 
> to do that soon.
> 
> On Fri, 14 Jan 2005, Michiel van Baak wrote:
> 
> > We have 2 HFC-S cards.
> > We have a very simular problem here.
> > restarting * means no more outgoing calls.
> > I first have to unload the modules, load them again and start asterisk.
> > plugging/unplugging cables from the cards dont give any problems here.
> > I fixed the asterisk reloading thing by altering the /etc/init.d/asterisk 
> > script.
> >
> > OT: I have the kernel oops messages when unloading the module like described 
> > on voip-info.org
> >
> > Michiel van Baak
> > Terrazur
> >
> >
> >> ----- Originele Bericht -----
> >> Van: Remco Barende
> >> Aan: Asterisk Users Mailing List - Non-Commercial Discussion Datum: 
> >> Thursday, 13 January 2005, 18:39 Onderwerp: Re: [Asterisk-Users] Bristuff 
> >> 0.20RC3 loses connectivity after short line interruption?
> >> 
> >> Sorry I forgot to mention that. Its just a cheap ass HFC-S single BRI 
> >> card (manufactured by E-Tech). I googled around and I know it can take 
> >> some time to recover for the NT1 but I think this doesnt apply for s0.
> >> 
> >> Even after waiting for 10 minutes I do not get any connectivity but 
> >> unloading and reloading the modules seems to solve the problem instantly.
> >> 
> >> I could even have a script do it as a really ugly way to solve it but I 
> >> dont think there is any way for a script to know if the ISDN connection 
> >> is lost or not.
> >> 
> >> Remco
> >> 
> >> 
> >> On Thu, 13 Jan 2005, George Konstantoulakis wrote:
> >> 
> >>> Same thing here,
> >>> I am using bristuff0.20-RC2b with an octoBRI card.
> >>> It only happens with DDI lines. With normal ISDN lines I dont have a 
> >>> problem.
> >>> Which card are you using ?
> >>> 
> >>> 
> >>> Remco Barende wrote:
> >>> 
> >>>> I installed bristuff0.20-RC3 (which includes * 1.0.3 stable)
> >>>> 
> >>>> It works fine until I disconnect the phone jack for the ISDN line. 
> >>>> Even after plug it back in asterisk still reports that it could not 
> >>>> create a zap channel when I try to dial out and the line gives an 
> >>>> engaged tone when I try to dial.
> >>>> 
> >>>> Re-starting asterisk doesnt solve this, I have to stop asterisk, 
> >>>> unload the modules, reload the modules and start asterisk again.
> >>>> 
> >>>> I assume this is a bug, not a feature (should I e-mail it to 
> >>>> Junghanns directly??)?
> >>>> 
> >>>> I know the telco here in holland and I will lose the line for a 
> >>>> short period every once in a while and its annoying when the line 
> >>>> doesnt come back up.
> >>>> 
> >>>> Or did I forget some setting to recover from such a situation?
> >>>> 
> >>>> Thanks!
> >>>> _______________________________________________
> >>>> Asterisk-Users mailing list
> >>>> Asterisk-Users at lists.digium.com
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>>> To UNSUBSCRIBE or update options visit:
> >>>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>> 
> >>> 
> >>> _______________________________________________
> >>> Asterisk-Users mailing list
> >>> Asterisk-Users at lists.digium.com
> >>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>> To UNSUBSCRIBE or update options visit:
> >>> http://lists.digium.com/mailman/listinfo/asterisk-users
> >>> 
> >> _______________________________________________
> >> Asterisk-Users mailing list
> >> Asterisk-Users at lists.digium.com
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> To UNSUBSCRIBE or update options visit:
> >> http://lists.digium.com/mailman/listinfo/asterisk-users
> >> 
> >
> >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>