[Asterisk-Users] CAC Channel Bank I - FXS

Richard Cook richard at aspworld.com
Sun Jan 16 12:49:45 MST 2005


 I solved this issue.  DIP switches marked Option A & Option B need to be
off (down).

--
Richard Cook
richard at aspworld.com
Tel: 705-497-9320  ext 2010
 

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com 
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of 
> Richard Cook
> Sent: Sunday, January 16, 2005 1:56 PM
> To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
> Cc: 'Andrew Kohlsmith'
> Subject: RE: [Asterisk-Users] CAC Channel Bank I - FXS
> 
>  > Subject: Re: [Asterisk-Users] CAC Channel Bank I - FXS
> > 
> > On January 15, 2005 03:39 pm, richard at aspworld.com wrote:
> > > I have a CAC Channel Bank I with FXS cards.  I've the 
> system up and 
> > > running, with just 1 issue.
> > 
> > > When I make an inbound call, Asterisk says "Zap/26 is ringing", 
> > > however, the phone never rings.  No lights are lit on the
> > CAC during the calll.
> > 
> > None at all, or just no change from idle?  If you pick up the line 
> > that you're ringing (but not hearing it ring), does it connect your 
> > call?
> 
> On idle, I have no lights on at all.  When the channel rings, 
> no lights are lit.  If I pick up the line while it's ringing, 
> yes, it does connect my call.
> 
> The only time a light is lit, is when I pick up the receiver 
> -- it goes red (in use -- outgoing).
> 
> > > Outbound call works no problem, and the CAC lights up correctly.
> > > Any ideas what could be the problem?
> > 
> > We could be of far more assistance if you posted the relevant bits 
> > from your zapata.conf and your zaptel.conf files...
> 
> Here is my zaptel.conf:
> 
> # span 1 = PRI
> span=1,1,0,esf,b8zs
> bchan=1-23
> dchan=24
> # span 2 = Channel Bank 1
> span=2,0,0,esf,b8zs
> fxols=25-48
> # span 3 = Spare
> span=3,0,0,esf,b8zs
> # span 4 = Spare
> span=4,0,0,esf,b8zs
> #
> unused=49-96
> 
> Here is my zapata.conf:
> 
> ; Channel Bank - port 1 - Sivana/VocTel alarm ; 
> signalling=fxo_ls context=internal
> callerid=7054979051
> channel=>25
> ;
> ; Channel Bank - port 2 - Sivana/VocTel Fax ; 
> signalling=fxo_ls context=internal
> callerid=7054979051
> channel=>26
> 
> I'm trying to call channel 26 which is the fax line (with a 
> handset plugged in).
> 
> --
> Richard Cook
> richard at aspworld.com
> Tel: 705-497-9320  ext 2010
>  
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 





More information about the asterisk-users mailing list