[Asterisk-Users] IAX2 Channels & Bandwidth

[Derek Conniffe]

Hi - I found the trunkfreq directive in iax.conf so I've put the directive
line into the iax peers section (along with "trunk=yes") - I'm sure you
meant iax.conf rather than zapata.conf ?

Thanks for the help,

Derek 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Andrew
Kohlsmith
Sent: 16 January 2005 00:06
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] IAX2 Channels & Bandwidth

On January 15, 2005 03:11 pm, Leif Madsen wrote:
> This is true if you are using IAX2 trunking.  This can be enabled with 
> trunk=yes in your peer  configuration.  The other end must also 
> support the trunking as well.

Also if you're using iLBC you need to set the trunking period to 30ms
instead of the default 20.  trunkfreq=30 in zapata.conf should do it.

-A.
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

---
Incoming mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.809 / Virus Database: 551 - Release Date: 09/12/2004
 

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.809 / Virus Database: 551 - Release Date: 09/12/2004