[Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
Eric Bishop
asterisk.eric at gmail.com
Fri Jan 14 18:38:15 MST 2005
I logged a support issue with HP and their response was that it's not
their server that is the problem and if other cards show interrupts
(which they do) there's nothing more they can do....
On Fri, 14 Jan 2005 16:30:25 +1000, Joshua McAdam <josh at tlmtech.com> wrote:
> Has anyone logged a support issue with HP on this one?
>
> I still haven't been able to get it working so far,
> So I'm going to log a support issue here in australia to see what HP can do
> about this and was wondering if anyone else has.
>
> Josh
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Alexander
> Lopez
> Sent: Monday, 10 January 2005 4:22 PM
> To: karlp at fortephones.com; Asterisk Users Mailing List - Non-Commercial
> Discussion
> Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server
>
> Make sure you has a span defined for each port on the TE410P. With out
> signaling it would not take interrupts.
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Karl H.
> Putz
> Sent: Monday, January 10, 2005 12:38 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
> server
>
> I have been having this exact problem with a Tatung dual EMT-64 server
> as
> well.
>
> I have been trying to get a TE410P running and all looks great, driver
> loads, runs ztcfg OK, etc. but no interrupts are ever processed.
>
> One additional piece of info that I have not seen in this thread is that
> I
> am able to successfully start and run a T100P card in this system. In
> the
> same PCI slot, wct1xxp driver built from the same CVS HEAD version as
> the
> wct4xxp.
>
> Just hoping this might shed some light on the problem for any Digium
> folks
> monitoring the forum.
>
> Karl Putz
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list