[Asterisk-Users] Packet8 DTA310 and Asterisk

[Erik Espinoza]

Whoops, I meant auth=plain for a packet8 dta.

Erik


On Fri, 14 Jan 2005 16:52:06 -0800, Erik Espinoza
<erik.espinoza at gmail.com> wrote:
> Under your sip.conf change to this:
> 
> [8006]
> type=friend
> host=dynamic
> auth=md5
> secret=1234
> dtmfmode=rfc2833
> context=sip
> callerid=8006
> mailbox=8006 at default
> 
> The key is auth=md5
> 
> I have set a few of my buddies who use to have packet8 on my asterisk
> box just fine.
> 
> Erik
> 
> On Fri, 14 Jan 2005 19:08:52 -0500, Olson, Dana <dolson at telespectrum.com> wrote:
> > I have my DTA310 getting an IP via DHCP. I loaded the unlocked firmware version (Application Code Version: DTA version 1.0 US (8x8 001111)) onto it via TFTP, so I could access the SIP configuration.
> >
> > Under the SIP config, I put the IP of my * system, the 5060 port, and for Domain Name, I put default (is that right?). I checked off the Send Registration Request box. Dial Plan I left at the default, 1xxxxxxxxxx|x.T (is that right?), and Transport is set to UDP. For Line 1, I have it set as follows: Phone Number=8006, CallerID Name=8006, Port=5060, AEC On=Off (no idea what this is), Username=8006, Password=1234.
> >
> > In the OOB Signalling page, where I set the RFC2833 options, I haven't changed anything from the defaults. Same goes for the VLAN pages.
> >
> > The CODECS page currently has G711U, G711A, and G729 selected, all three with Silence Suppression turned off.
> >
> > I have other VoIP phones (soft and hard) working.
> >
> > >From extensions.conf:
> > [sip]
> > exten => 8006,1,Answer
> > exten => 8006,2,Wait(1)
> > exten => 8006,3,Dial(SIP/8006,20)
> > exten => 8006,4,Voicemail(u8006)
> > exten => 8006,5,Hangup
> > exten => 8006,103,Voicemail(b8006)
> > exten => 8006,104,Hangup
> >
> > >From sip.conf:
> > [8006]
> > type=friend
> > host=dynamic
> > secret=1234
> > dtmfmode=rfc2833
> > context=sip
> > callerid=8006
> > mailbox=8006 at default
> >
> > >From voicemail.conf:
> > [default]
> > 8006 => 1111,Packet8,dolson at telespectrum.com
> >
> > Okay, so when I apply those settings and restart the unit, I get a bunch of these messages in the * console:
> >
> > Jan 14 18:03:42 NOTICE[17688]: chan_sip.c:7446 handle_request: Failed to authenticate user 8006<sip:8006 at default>;tag=t2a7aca1ef6g41a7 for SUBSCRIBE
> >
> > And these messages continue once or twice every second until I reset the phone or unplug it. During this time, if I pick up the phone, I hear a dialtone. If I hang up and pick up again, the dialtone is still there. However, if I try dialing another * extension, say 8005, it doesn't do anything. If I hang up and pick up again after trying this, the dialtone is gone. If I try the same thing but instead dial 8005#, the same thing happens. If I wait for a few seconds/minute after hanging up, I'll get the dialtone back. If I try to dial a long disatance, the same thing happens. If I try without the 1 for long distance, the same thing happens. If I try with a 9 in front of 1 and then the number (this works for our other phones) then the same thing happens. However, now I'm getting more messages in the * console mixed in with the original ones:
> >
> > Jan 14 19:04:24 NOTICE[17688]: chan_sip.c:7446 handle_request: Failed to authenticate user 8006<sip:8006 at 10.66.4.245>;tag=t2c3b0a372ad3g for SUBSCRIBE
> >
> > Maybe the dialplan is set wrong in the web config of the DTA310? I don't know what I would set it to though.
> >
> > If anyone can assist, then that would be appreciated.
> > __
> > Dana Olson
> >
> > Disclaimer: The information transmitted in this message is intended only for the person or entity to which it is addressed and may contain confidential and/or privileged material.  Any review, retransmission, dissemination, or other use of or taking of any action in reliance upon this information by persons or entities other than the intended recipient is prohibited.  If you received this message in error, please contact the sender and delete the material from any system.
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>