[Asterisk-Users] Help in E1-T1 encoding

[Peter Svensson]

On Fri, 14 Jan 2005, Alejandro G wrote:

> Sorry for the delay. I had to reconfigure all again. I do I inbound call to
> asterisk and the result log is this (hope this is usefull):

> < Protocol Discriminator: Q.931 (8)  len=47
> < Call Ref: len= 2 (reference 1280/0x500) (Originator)
> < Message type: SETUP (5)
> < [04 03 80 90 a2]
> < Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
> capability: Speech (0)
> <                              Ext: 1  Trans mode/rate: 64kbps, circuit-mode
> (16)
> <                              Ext: 1  User information layer 1: u-Law (34)
> < [18 03 a9 83 81]

Ok, the incoming call is signalled as being u-Law from the originating
device to Asterisk. Can you describe the set up (E1/T1, expected codecs on
the various legs) for this call? Also, sum up the problem again.

Peter