[Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4 server
Karl H. Putz
karlp at fortephones.com
Fri Jan 14 11:12:38 MST 2005
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Tony
> Mountifield
> Sent: Friday, January 14, 2005 12:56 PM
> To: asterisk-users at lists.digium.com
> Subject: [Asterisk-Users] Re: TE410P card in an HP-Compaq DL380 G4
> server
>
>
> In article <41E7AA02.1060104 at sineapps.com>,
> Matt Riddell <matt.riddell at sineapps.com> wrote:
> > Steve Hanselman wrote:
> > > I'm assuming that other non Digium cards work in it, but yes,
> you're right.
> > >
> > > Has anybody run any other PCI cards in those slots under
> Linux and seen
> > > interrupts from those cards?
I am not using the HP-Compaq server listed but am having the Exact problems
mentioned on a Dual EMT64 server from Tatung
-All outward appearance is that the TE410 is working (module loads, ztcfg
runs with no error, etc)
except no interrupts.
I successfully ran a T100P card in the same slot using the wct1xxp module
compiled from the same CVS Head source as the non-working wct4xxp module.
Karl Putz
> >
> > You'd be hard pressed to find a standard card requiring accurate
> > interrupts 1000 times per second...
>
> That's not the issue - the issue is: can another type of card in the
> same slot raise an interrupt when it needs to?
>
> I had the same problem of no interrupts from a TE405P in a 1U chassis
> with a backplane. When we demonstrated that a standard LAN card was
> also unable to generate an interrupt, the vendor accepted that it could
> be a problem with their backplane, and came up with a hardware fix.
>
> Cheers
> Tony
> --
> Tony Mountifield
> Work: tony at softins.co.uk - http://www.softins.co.uk
> Play: tony at mountifield.org - http://tony.mountifield.org
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
More information about the asterisk-users
mailing list