[Asterisk-Users] TDM400 answers the line all the time!

[Justin Carlson]

no i was using line 1 for testing /w fxs module and i never changed it
back

On Fri, 2005-01-14 at 07:43 -0500, Michael George wrote:
> On Mon, Jan 17, 2005 at 08:12:24AM -0600, Justin Carlson wrote:
> > hi all,
> > 
> > 	We have a TDM400 card with 4 wfo modules.  now the modules load fine
> > and when i start asterisk with on phone line connected it just starts
> > spewing these messages:
> >    -- Starting simple switch on 'Zap/4-1'
> > Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2
> > (Ring/Answered)...
> > Jan 13 12:59:47 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2
> > (Ring/Answered)...
> > Jan 13 12:59:49 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2
> > (Ring/Answered)...
> > Jan 13 12:59:49 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2
> > (Ring/Answered)...
> > Jan 13 12:59:51 NOTICE[10831]: chan_zap.c:5367 ss_thread: Got event 2
> > (Ring/Answered)...
> > 
> > but no one is calling.  i have plugged in a analog phone and dialed out
> > on this line before i used it for *.  any help would be great.
> > 
> > zapata.conf 
> > [trunkgroups]
> > [channels]
> > language=en
> > context=routing
> > group=1
> > immediate=no
> > signalling=fxs_ks
> > channel => 1-4
> > 
> > zaptel.conf
> > fxsks=2-4
> > loadzone = us
> 
> Is there a reason you have "fxsks=2-4" in zaptel.conf rather than 1-4?
>