[Asterisk-Users] How to set asterisk NOT to answer incoming lines?

[Michiel van Baak]

What I did, and what worked is setting the context in zapata.conf to from-ata
In the extensions.conf I have defined the extensions I want to route with asterisk, and I left our fax nr out.
When a fax comes in * simply tells me it is ignoring the call because  there is no extension for the call.

[from-ata]
exten => ${LINE1},1,Dial(SIP/10,20,Ttr)
exten => ${LINE1},2,Dial(SIP/10&SIP/11&SIP/12,20,Ttr)
exten => ${LINE2},1,Dial(SIP/13,20,Ttr)
exten => ${LINE4},1,Goto,default|s|1

Works like a charm.

Met vriendelijke groet,

Michiel van Baak
Terrazur


> ----- Originele Bericht -----
> Van: Eric Wieling aka ManxPower
> Aan: C F , Asterisk Users Mailing List - Non-Commercial Discussion 
> Datum: Friday, 14 January 2005, 05:05 
> Onderwerp: Re: [Asterisk-Users] How to set asterisk NOT to answer incoming lines?
> 
> C F wrote:
> > I know that according to the docs you are right. Im just asking you
> > for a favor, if you have a digium TDM04B test this, and tell me the
> > result. When I tested it, it didnt work.
> 
> I let the call ring for 60 seconds. It was never answered.
> 
> fs-1*CLI>
> -- Starting simple switch on Zap/1-1
> -- Executing NoOp("Zap/1-1", "5042325606") in new stack
> -- Timeout on Zap/1-1
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>