[Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server

[Steve Hanselman]

Has anyone also logged a support call with Digium, it has to be either the
card, Linux or the Zaptel drivers.

Steve


-----Original Message-----
From: Joshua McAdam [mailto:josh at tlmtech.com] 
Sent: 14 January 2005 06:30
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server

Has anyone logged a support issue with HP on this one?

I still haven't been able to get it working so far,
So I'm going to log a support issue here in australia to see what HP can do
about this and was wondering if anyone else has.

Josh

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Alexander
Lopez
Sent: Monday, 10 January 2005 4:22 PM
To: karlp at fortephones.com; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server

Make sure you has a span defined for each port on the TE410P. With out
signaling it would not take interrupts.
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Karl H.
Putz
Sent: Monday, January 10, 2005 12:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
server

I have been having this exact problem with a Tatung dual EMT-64 server
as
well.

I have been trying to get a TE410P running and all looks great, driver
loads, runs ztcfg OK, etc. but no interrupts are ever processed.

One additional piece of info that I have not seen in this thread is that
I
am able to successfully start and run a T100P card in this system.  In
the
same PCI slot, wct1xxp driver built from the same CVS HEAD version as
the
wct4xxp.

Just hoping this might shed some light on the problem for any Digium
folks
monitoring the forum.


Karl Putz



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

The information contained in this email is intended for the personal and confidential use
of the addressee only. It may also be privileged information. If you are not the intended
recipient then you are hereby notified that you have received this document in error and
that any review, distribution or copying of this document is strictly prohibited. If you have 
received  this communication in error, please notify Brendata immediately on: 

+44 (0)1268 466100, or email 'technical at brendata.co.uk' 

Brendata (UK) Ltd
Nevendon Hall, Nevendon Road, Basildon, Essex. SS13 1BX  UK
Registered Office as above. Registered in England No. 2764339

See our current vacancies at www.brendata.co.uk