[Asterisk-Users] ASTCC configuration problem

[Steve Totaro]

> > > > > If nothing else, my efforts are documented for anyone else in the
> > > > > same boat.
> > > > > It seems that you can debug agi by typing agi debug at the *
command
> > > line.
> > > > > Amazing!  Here is the output.  I am assuming that since astcc-tone
> > didnt
> > > > > play, the problem lies there.  Thoughts?
> > > >
> > > > Steve,
> > > >
> > > > I just remembered...
> > > >
> > > > The Makefile puts all its sounds into /usr/share/asterisk/sounds but
*
> > > needs
> > > > the sounds in /var/lib/asterisk/sounds.
> > > >
> > > >
> > > > Karl
> > >
> > > Karl,
> > >
> > > Thanks alot!  Everything is working now but I dont get any
> > audio in either
> > > direction.  If I dial the same external number from the same
extension,
> > > everything is fine but going through the AGI breaks the audio.
> >
> > To clarify, I get audio just fine while entering the pin and phone
number
> > but when the call connects over my IAX provider there is no audio
> > in either
> > direction.
>
> Steve,
>
> I sounds like the problem may be in your "trunks" table definition of the
> IAX2 connection.
>
> Unfortunately, I am only using TDM interfaces so I do not know what the
path
> field should contain for IAX.
> For Zap interfaces, I simply put the group I want to use.  I.e. "g2".
>
>
> Karl

My final solution after seeing some other posts about CVS update fixing
different issues was to update.  It all works perfectly now.  Thanks again.

Steve