[Asterisk-Users] Setting channel display in SIP

[Adam Goryachev]

On Thu, 2005-01-13 at 10:20 +1100, Howard Lowndes wrote:
> I have a situation where I need to know which Zap channel an incoming
> call is on, so that the call can be answered appropriately when a SIP
> phone displays the channel.  These Zap calls are coming in over PSTN and
> don't have caller ID.
> 
> As far as I can make out my SIP phones (WuChuan HOP-1002) display the
> user part from the SIP "From:" header as the second line on the
> display.  If the call comes from another SIP phone then this shows as
> the phone's number, but when the call comes in over the Zap channels
> then it gets generated as "asterisk".

AFAIK, this is the default callerid asterisk uses when it doesn't
receive callerid.
Try adding setcallerid in your dialplan, or callerid in your zapata.conf
for each channel.


Regards,
Adam