[Asterisk-Users] What's the easiest way to get * to call PSTN?

[Michael B. Murdock]

Who makes the TNT-Max ??

-- Mike

  ----- Original Message ----- 
  From: TC 
  To: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Wednesday, January 12, 2005 5:01 PM
  Subject: Re: [Asterisk-Users] What's the easiest way to get * to call PSTN?


  ebayed TNT-Max with SIP for mere 8 pri you might get that for 3K or better
  I know i was offered a 4 pri tnt-max for us1500
    ----- Original Message ----- 
    From: Michael B. Murdock 
    To: Asterisk Users Mailing List - Non-Commercial Discussion 
    Sent: Wednesday, January 12, 2005 1:39 PM
    Subject: Re: [Asterisk-Users] What's the easiest way to get * to call PSTN?


    We are also looking for a high density SIP<->TDM gateway (signalling & media) as an alternative to putting the ISDN PRI cards in the * box. Ideally it should support up to 8 ISDN Pri's with NFAS on the TDM side and 100baseT/1000baseT on the IP side.

    Has anyone had experience with this type of config?

    -- Mike

      ----- Original Message ----- 
      From: Walid Azab 
      To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 
      Sent: Wednesday, January 12, 2005 12:18 PM
      Subject: RE: [Asterisk-Users] What's the easiest way to get * to call PSTN?


      We have Asterisk CVS 1.0.2. I intend to connect Asterisk to Cisco 3745 unless there is a better way. Asterisk is not configured with any H/W. Cisco 3745 will accordingly send the call to the softswitch. PGW2200 which controls our AS5300.

      Walid



--------------------------------------------------------------------------
      From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Damon Estep
      Sent: Wednesday, January 12, 2005 3:25 PM
      To: Asterisk Users Mailing List - Non-Commercial Discussion
      Subject: RE: [Asterisk-Users] What's the easiest way to get * to call PSTN?


      You have not specified what type of lines you wish to use, POTS, PRI, T1-CAS, E1, ISDN/BRI ???

       


--------------------------------------------------------------------------

      From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Walid Azab
      Sent: Wednesday, January 12, 2005 5:11 AM
      To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
      Subject: [Asterisk-Users] What's the easiest way to get * to call PSTN?

       

      Hi,

       

      I just want to know what is the easiest way to have Asterisk route calls to PSTN. Hope any one can help me.

       

      PS: Any solution using a Cisco device is preferable.

       

       

      Thanks

      Walid



--------------------------------------------------------------------------


      _______________________________________________
      Asterisk-Users mailing list
      Asterisk-Users at lists.digium.com
      http://lists.digium.com/mailman/listinfo/asterisk-users
      To UNSUBSCRIBE or update options visit:
         http://lists.digium.com/mailman/listinfo/asterisk-users


----------------------------------------------------------------------------


    _______________________________________________
    Asterisk-Users mailing list
    Asterisk-Users at lists.digium.com
    http://lists.digium.com/mailman/listinfo/asterisk-users
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-users


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050112/513d41e2/attachment.htm