[Asterisk-Users] What's the easiest way to get * to call PSTN?

[Walid Azab]

We have Asterisk CVS 1.0.2. I intend to connect Asterisk to Cisco 3745
unless there is a better way. Asterisk is not configured with any H/W. Cisco
3745 will accordingly send the call to the softswitch. PGW2200 which
controls our AS5300.
 
Walid

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Damon Estep
Sent: Wednesday, January 12, 2005 3:25 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] What's the easiest way to get * to call PSTN?



You have not specified what type of lines you wish to use, POTS, PRI,
T1-CAS, E1, ISDN/BRI ???

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Walid Azab
Sent: Wednesday, January 12, 2005 5:11 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] What's the easiest way to get * to call PSTN?

 

Hi,

 

I just want to know what is the easiest way to have Asterisk route calls to
PSTN. Hope any one can help me.

 

PS: Any solution using a Cisco device is preferable.

 

 

Thanks

Walid

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050112/2b4a2a4e/attachment.htm