[Asterisk-Users] ASTCC configuration problem

[Karl H. Putz]

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Steve
> Totaro
> Sent: Wednesday, January 12, 2005 10:30 AM
>
> If nothing else, my efforts are documented for anyone else in the
> same boat.
> It seems that you can debug agi by typing agi debug at the * command line.
> Amazing!  Here is the output.  I am assuming that since astcc-tone didnt
> play, the problem lies there.  Thoughts?

Steve,

I just remembered...

The Makefile puts all its sounds into /usr/share/asterisk/sounds but * needs
the sounds in /var/lib/asterisk/sounds.


Karl


>
> AGI Debugging Enabled
>     -- Accepting AUTHENTICATED call from x.x.x.x, requested format = 1024,
> actual format = 2
>     -- Executing Answer("IAX2/200 at 200/5", "") in new stack
>     -- Executing DeadAGI("IAX2/200 at 200/5", "astcc.agi") in new stack
>     -- Launched AGI Script /var/lib/asterisk/agi-bin/astcc.agi
> AGI Tx >> agi_request: astcc.agi
> AGI Tx >> agi_channel: IAX2/200 at 200/5
> AGI Tx >> agi_language: en
> AGI Tx >> agi_type: IAX2
> AGI Tx >> agi_uniqueid: 1105546846.5
> AGI Tx >> agi_callerid: "(Softphone) Steve\'s Dell" <200>
> AGI Tx >> agi_dnid: 77
> AGI Tx >> agi_rdnis: unknown
> AGI Tx >> agi_context: from-internal
> AGI Tx >> agi_extension: 77
> AGI Tx >> agi_priority: 2
> AGI Tx >> agi_enhanced: 0.0
> AGI Tx >> agi_accountcode:
> AGI Tx >>
> AGI Rx << ANSWER
> AGI Tx >> 200 result=0
> AGI Rx << STREAM FILE astcc-tone 0123456789
> AGI Tx >> 200 result=0 endpos=0
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>