[Asterisk-Users] internal caller id on analog phonesconnectedtozap

[John Bohman]

I found this to be missing... thank you,
However after restarting, rebooting, and re-building.. no change..
Still no callerid on the Zap channels...
It is however working on my 7960 so I know the feed from the FXO card is
working fine..

I have even specified it not only in the Channels context but on each
individual channel with no effect so I backed them out and left the main one
in..
Any other ideas ??
Thanks in advance..
John B.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of C F
Sent: Tuesday, January 11, 2005 1:42 PM
To: bohmanj at adcnoc.com; Asterisk Users Mailing List - Non-Commercial
Discussion
Subject: Re: [Asterisk-Users] internal caller id on analog
phonesconnectedtozap

You should put in zapata.conf
usecallerid=yes


On Tue, 11 Jan 2005 12:48:40 -0500, John Bohman <bohmanj at adcnoc.com> wrote:
> I just noticed the same thing, I just pulled the latest version from CVS
and
> what was working perfectly before is now dead..
> I'm running a 4port card with 3 FXS modules and 1 FXO..
> Running: Asterisk CVS-v1-0-01/10/05-17:32:27
> Did something change, someone add a new switch to turn it on..
> I'm running a basic stock Zapata.conf file that was working great before..
> John B.
> 
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Shoval Tomer
> Sent: Tuesday, January 11, 2005 12:25 PM
> To: C F; Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] internal caller id on analog phones
> connectedtozap
> 
> > -----Original Message-----
> > From: C F [mailto:shmaltz at gmail.com]
> > Sent: Tuesday, January 11, 2005 4:38 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: Re: [Asterisk-Users] internal caller id on analog phones
> > connected tozap
> >
> > How are the analog phones connected to * ? this is where the setting
> > should be.
> 
> They're connected to Digium cards.
> How do I set it in Zapata.conf? everything we tried didn't work.
> Here's an excerpt:
> 
> signalling = fxo_ks
> context = internal
> threewaycalling = yes
> transfer = yes
> group = 1
> pickupgroup = 1
> mailbox = 202
> channel => 2
> 
> this channel is connected to an analog phone with an LCD display.
> 
> How do I make it show caller id?
> 
> > If you use Digium then you set it in zapata.conf, if you use an ata
> > the setting should be in the ata.
> > BTW, how is FC3 working out?
> 
> We decided to go with FC 2 as it supports SATA and seems more stable.
> Asterisk compiled just fine on FC 2.
> We had to use modprobe for the wcfxs drive instead of insmod (we're
> using STABLE 1.0.3, not CVS-HEAD)
> During the time it took to download it there, I downloaded FC 3 here,
> and asterisk compiled just fine. So did zaptel, but I had no Digium
> hardware to test with.
> As soon as I will I'll post to the list.
> 
> > Shalom Ubracha V'Chodesh Tov
> >
> >
> 
> Thanks (TODA RABA)
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users