[Asterisk-Users] Sip to IAX ok, ZAP to IAX FAILS

[Ernie Ankele]

Adam, I think I got it worked out...
I changed disallow=723.1 to disallow=all and then accepted back in 
ulaw,alaw,gsm and ilbc and
it started accepting the calls. I do not know why, but its working now.
FWIW, here is the full frame as it was before:
Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX     Subclass: 
NEW
    Timestamp: 00009ms  SCall: 00001  DCall: 00000 [xx.xxx.xxx.xxx:20406]
    VERSION         : 2
    CALLED NUMBER   : s
    CODEC_PREFS     : (gsm|ulaw|alaw|ilbc)
    CALLING NUMBER  : 3035520218
    CALLING PRESNTN : 0
    CALLING TYPEOFN : 0
    CALLING TRANSIT : 0
    LANGUAGE        : en
    FORMAT          : 64
    CAPABILITY      : 1048575
    ADSICPE         : 2
    DATE TIME       : 170564634
thanks, Ernie

On Jan 10, 2005, at 7:17 PM, Adam Hart wrote:

> Can you paste the full NEW frame please. Could be Preference vs 
> capability
>
> thanks,
>
> Adam
>
>
> Ernie Ankele wrote:
>> On a sip to iax :
>> CODEC_PREFS     : (gsm|ulaw|alaw|ilbc)
>> and
>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX     
>> Subclass: ACCEPT
>>    Timestamp: 00000ms  SCall: 19170  DCall: 00001 
>> [xx.xxx.xxx.xxx:20406]
>>    FORMAT          : 4
>>     -- Call accepted by xx.xxx.xxx.xxx (format ulaw)
>>     -- Format for call is ulaw
>> On ZAP to IAX:
>> CODEC_PREFS     : (gsm|ulaw|alaw|ilbc)
>> and
>> Rx-Frame Retry[ No] -- OSeqno: 000 ISeqno: 001 Type: IAX     
>> Subclass: REJECT
>>    Timestamp: 00000ms  SCall: 15725  DCall: 00003 
>> [xx.xxx.xxx.xxx:20406]
>>    CAUSE           : No compatible Codecs
>> Jan 10 18:50:06 WARNING[1378]: chan_iax2.c:6017 socket_read: Call 
>> rejected by xx.xxx.xxx.xxx: No compatible Codecs
>> Thanks, Ernie
>> On Jan 10, 2005, at 6:34 PM, Adam Hart wrote:
>>> use ethereal or iax2 debug to see what capabilities are been set in 
>>> your NEW message
>>>
>>> Ernie Ankele wrote:
>>>
>>>> Hello,
>>>> Could someone give me clues where to figure out this problem?
>>>> If I call from a Sip client to an Firefly client running IAX, the 
>>>> call connects fine, no problems.
>>>> I can connect to asterisk using any codec (excepting g.729) on 
>>>> firefly to voicemail and music-on-hold, other sip extensions and 
>>>> everything works fine.
>>>> If I try to connect to the same client via a ZAP channel (X100P 
>>>> clone), via Dial(IAX2/XXXX) I get an error :
>>>> Jan 10 18:07:26 WARNING[1378]: chan_iax2.c:6017 socket_read: Call 
>>>> rejected by xx.xxx.xxx.xxx: No compatible Codecs
>>>> I just updated asterisk to cvs-head-1-10-2005. All codecs are 
>>>> allowed in IAX.conf and all codecs are enabled on Firefly.
>>>> I have tried everything I can think of- only enable gsm, only 
>>>> gsm+G.711, all codecs on firefly. Same results.
>>>> Anyone else with this issue?
>>>> Thanks, Ernie
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>